Only 3 left, they going crazy fast
Coppervape Skyline Discussion
- Thread starter spiv
- Start date
At that price point it's outstanding value for money.
Order placed about 45 minutes ago. There were 9 available, now only 3 
I ordered a few with all the bits n pieces from 3FVape a couple of weeks ago, but couldn't resist getting one sooner
I ordered a few with all the bits n pieces from 3FVape a couple of weeks ago, but couldn't resist getting one sooner
Not sure what the current cost of shipping is via DHL, but when I checked a few months ago, they quoted about $27 which was more than what I wanted to order, so decided against that shipping option.
.
This doesn't surprise me, some companies put out quality clones.The Sherman clone I bought is excellent and so is the SXK Hadaly I picked up.
Last edited:
If I'm not mistaken they do.
I just placed my order with The Vape Guy, theres still 3 left now. (R490 +R99 shipping)
http://vapeguy.co.za/Clearomizer-At...ape-skyline-rta-clone?sort=p.price&order=DESC
Hi @spiv ,mine arrived as I was reading your response so I excitedly got it from my mailbox and sat down to open it.As I took inventory on it I put Geaky Vapes review tutorial on to see how to take it apart.The construction looks a-one until I found that I couldn't unscrew my juice control. I followed the advice and tried to unscrew it counter clockwise but no dice.I put a drop of Royal Purple on where the seam is and now I wait.It figures if this isn't a common problem mine would be the one in a thousand that fouls up.I hope it's just a minor snag as I was looking forward to this one.Oh well!
If it doesn't work, chuck it in the freezer for 20 mins. Take it out and try again. Remember to unscrew that metal part just below the JFC before you try turn it, just to be safe that isn't stopping anything.
I think I recall that that was an issue with the authentics too. @spiv 's freezer trick was the winning solution in that case too.
I did this as it has helped me in the past.No dice.I'm just going to send it back.Shame tho as this arrived in nine days,a fast tech record for me.Go figure.The way my luck runs it'll be out of stock. LoL
When it comes to the hadaly, I prefer the clone because the top cap isn't as tight as the one on the original.
Sent from my iPhone using Tapatalk
dropped off this morning. Cant wait to get it going this evening to see what all the hype is about
@kev mac then it's a 1:1 clone as I had same issue with my authentic
Order placed on Sunday for skyclone from 3F. Would've taken delivery yesterday but because I'm out of the country the office was closed for lunch as I usually work the lunch shift. How's that for record time? 2 days for delivery from china. That's faster than some of our local vendors lol
Sent from my iPhone using Tapatalk
That's a shame. It does come a little tight but loosens up quite quickly once it can move. Hope your next one is better.
Just got mine - really impressed with the build quality !!!
What size diameter coil would you guys recommend going with ?
What size diameter coil would you guys recommend going with ?
is the juice flow stuck in the closed positioned? if you remove the top cover and cap you should see a hex nut. see if you can turn this by hand. I somehow closed mine and may have turned the top cap to many times and I suspect the top cap fails to catch the hex nut when it lies to low. I think there is a video link using a socket to open but if it's too tight don't force it as it may warp.
Damn thats impressive, whats the secret? Wich delivery option did you take?
Order placed on Sunday for skyclone from 3F. Would've taken delivery yesterday but because I'm out of the country the office was closed for lunch as I usually work the lunch shift. How's that for record time? 2 days for delivery from china. That's faster than some of our local vendors lol
Sent from my iPhone using Tapatalk
Enjoy bud
My Fasttech Skyclone arrived in SA today (after about a week). But now the real wait begins, obviously.
However none of that really matters since my Skyclone from VapeGuy should be here tomorrow anyway
Question: how do you get the SA tracking number?
2017-07-12 12:50
Destination Country, Item arrived to destination country.
2017-07-12 01:40
Turkey, ISTANBUL, Item was uplifted to flight to destination country.
2017-07-10 19:27
Turkey, Gonderi yurt disina sevk edildi (Giden), The item was forwarded to the destination country (Otb)
2017-07-10 18:47
İSTANBUL(AVR), BAŞAKŞEHİR, Kabul Edildi
2017-07-07 23:19
Origin, Item departed from origin
2017-07-06 19:28
Origin, Item is at agent warehouse
2017-07-05 05:04
Origin, Sipariş Sevk Edilmek İçin Hazır/Item Is Ready for Ship
However none of that really matters since my Skyclone from VapeGuy should be here tomorrow anyway
Question: how do you get the SA tracking number?
2017-07-12 12:50
Destination Country, Item arrived to destination country.
2017-07-12 01:40
Turkey, ISTANBUL, Item was uplifted to flight to destination country.
2017-07-10 19:27
Turkey, Gonderi yurt disina sevk edildi (Giden), The item was forwarded to the destination country (Otb)
2017-07-10 18:47
İSTANBUL(AVR), BAŞAKŞEHİR, Kabul Edildi
2017-07-07 23:19
Origin, Item departed from origin
2017-07-06 19:28
Origin, Item is at agent warehouse
2017-07-05 05:04
Origin, Sipariş Sevk Edilmek İçin Hazır/Item Is Ready for Ship
It's ironic because I got this in nine days, a FT record for me.And that this clone seems really well made.I doubt I'll get this one half as fast.
I went on line to get the low down on this before I started screwing with it and did indeed use the hex thingy.I did the freezer trick and used Royal Purple lube on it to try to loosen it but no go,this seems welded together.
DHL. karma has it that I'm not even at home to open the parcel
Sent from my iPhone using Tapatalk
Similar threads
