Thats great, fluffed out and thinning it is shup as for wicking it should be as normal not too tight or loose. Too tight you'll get dry hits too loose you'll get spit backs both aren't pleasant.
Coppervape Skyline Discussion
- Thread starter spiv
- Start date
The Bow Tie method is needed... trim your wick tails at an angle of 45 degrees and then tuck the thin tails into the juice channels.
I bow tie, loose wick, set coil very low n gives great flavour. I don't use the airdisks either.
That's weird, I had no issues, used a 2.5 Clapton, 0.45 at 20W
I think it’s my wicking I haven’t fixed since my issues yesterday
I don't use the bow tie method but this may help. First you want the cotton quite tight in the coil, not tight enough to deform the coil but it should have quite a bit of resistance when pulling it through, comb the tails out with a pick, I use a blackhead remover, start at the tip of the tail and work towards the coil so you don't comb out clumps of cotton.
Rest your scissors by the outer o ring and cut.
Gently tuck your wicks without compressing them. The Skyline dry hits if there's too little cotton as well as too much. 
This is exactly how’s i wick most of my builds, I just don’t know WHY! I’ll try again later, I put some tobacco juice, element honey roasted tobacco to taste but skylines are suppose to shine with menthol fruits!
You do open the juice control, if I dare to ask?
I tried 2.5mm then I put this 3mm in now,
Feel so bad for you @Jengz
Many other folk report great things with their Skylines
I wonder if its possible somehow that there is something wrong with yours
Maybe something slightly not right with juice flow or something
Have you tried anyone else's device?
Can’t be because I got it from a legend @Deckie ... he had much love for it too, it’s my wicking Skills probably because after priming the coils first, the first few pulls are great
Don't over stuff with cotton as has been previously mentioned. I also use the largest disc but I've read people saying they vape with no disks for extra air flow. Check out some videos on line perhaps someone can give some tips.Don't give up as it gives good flavor when you find your build,it'll happen!
I'm just stunned you managed to get 7 wraps of 3id in there
Hahaha when u struggling so much, you will try and do anything
The only issue with mine is that I battle to open it! It's like it sucks tight and you need some seriously strong hands to get it open... I'm in that situation again now... it needs a re-wick... but I can't get it open... So it's laying at home patiently waiting for strong hands to help me out... The wasp nano is in use again now... at least I can open that one by myself!! 
The only issue with mine is that I battle to open it! It's like it sucks tight and you need some seriously strong hands to get it open... I'm in that situation again now... it needs a re-wick... but I can't get it open... So it's laying at home patiently waiting for strong hands to help me out... The wasp nano is in use again now... at least I can open that one by myself!!
I changed the o-ring like @Rob Fisher suggested and it makes a world of difference
It's not for the juice flow... it's to get to the actual deck...
Or will changing the O-ring on the deck itself help with that too?
The only issue with mine is that I battle to open it! It's like it sucks tight and you need some seriously strong hands to get it open... I'm in that situation again now... it needs a re-wick... but I can't get it open... So it's laying at home patiently waiting for strong hands to help me out... The wasp nano is in use again now... at least I can open that one by myself!!
This morning I can sympathize - just broke my glass for that reason. Spare glass fitted and added to my next order.
Sent by iDad's iPhone
Where are you ordering the spare glass from? I also need some spare glass for it.
Similar threads
