Dem builds

Hello Spydro. What ohms is that running at and what wattage are you vaping it at?

The Avo G quad build nets 0.15Ω. What wattage I run depends on which DIY I am running in it. You would also have to find your own wattage for each of the liquids you use in it.
 
Hey KZOR see u are stil using the mad dag
Yea ........ still think it is one of the best entry level RDA's out there. I get great flavour with simple builds like the fused SS Clapton (2x28ga wrapped with a 34ga) or plain Clapton (26ga wrapped with a 36ga).
I mostly use SS but also Nichr80.
Don't see myself ever selling this gem. :)
 
Its been a while since I last posted here and I thought its time I start again.

2x 26g\36g all SS 9 wraps around a 3mm bit ohming out @ 0.19

Vaping at 110W its a nice warm vape.
3b3cb8835296092dee9ff2fc25977aa2.jpg
e99c52545397d5503dc3721eed2a7342.jpg
190580445b0796ded63923afe8a61784.jpg


Sent from my LG-H870 using Tapatalk
 
Decided to do a youtube tutorial on how to make stapled fused clapton wire. Unlike my previous post i decided to go the smaller route by using 0.3 by 0.1 mm ribbons and bordering them with 28ga and claptoning with 38ga.
Then used the wire and made two coils for my Hadaly so when i get my insulation part i have a build ready to install. Have a feeling these coils will produce fantastic flavor. :)
Video should be up in an hour and a bit.
DSC_9461.JPG DSC_9455.JPG
DSC_9459.JPG
 
Nice coils... willing to bet that 26g ss caused some bleeding fingers with manual twisting :p
Is it just the camera angle or are they touching the top cap, though? (or rather, where the top cap would be)

Think it was the angle moved them a bit more in with my first re wick. No blood sacrifice was made with those thought the vape would be terrible because they did not drew blood.
 
IMG_20170527_224315.jpg IMG_20170527_224350 (1).jpg
24g ni80 3.5mm at 0.21 ohms.
The twisted stainless was better but these are power hungry. Any thing above 60 watts seem to work but 80 to 122 seems to be the best.
Blood sacrifice was made with these.
 
Nice build, but technically speaking it's a dual coil, as it's in parallel :p
Nice build

Dual / staged
Is like another wire between or next to your main wire like a catalist ie: ni80 to create a quick heat

As ive come to understand it.
Parralel means opposite to your post.
Wateva.
Still looks pretty




Sent from my SM-G930F using Tapatalk
 
IMG_20170603_000604.jpg IMG_20170603_000639.jpg
Some poorly made parallel ni80 24g 3.5ID at 0.14 ohms my lowest build yet.
even though they are poorly made the vape is good epic clouds and flavor.
 
My second build, nothing special:
Fused Clapton (28ga*2 + 32ga KA1) 3mm 7 wraps 0.43Ohm
qejqQrJ.jpg

Sitting in a Peerless RDA on a Smok Alien
 
Ever since I've received my Daedalus I've been making simple dual core fused claptons, watched countless videos on how to get the tri core and multi core right to no avail, ended up wasting a ton of wire. I spoke to a couple coil builders who tried helping me, though I guess this didn't really help much as our levels of skill are very very different. Couple weeks back I met a gent named Hasan, Hasan builds coils and goes by the name of Crafted Coils, great guy, I was surprised at how much he was willing to help. Anyway he gave me a quick tutorial on how to get my multi cores from twisting and climbing all over each other and also on how to learn how much tension to put on the clapton wrap wire. Today for the very first time I wanted to try out a tri core alien (3 x 29ga with 38ga alien), this tested my patience as first I stretched out the de-cored clapton too much so the wraps were pretty much the same as a normal clapton would be, I tried again, got the stretch right but while wrapping, if I adjusted my grip on the wire even a little I ended up wrapping over the previous wraps. Some wire, swearing and deep breaths later I'm proud of my accomplishment. I've finally managed to make 2 near perfect aliens and these last 2, once I got a feel for it took me but 10 minutes.IMG_20170610_000415.jpg IMG_20170610_000509.jpg
 
Ever since I've received my Daedalus I've been making simple dual core fused claptons, watched countless videos on how to get the tri core and multi core right to no avail, ended up wasting a ton of wire. I spoke to a couple coil builders who tried helping me, though I guess this didn't really help much as our levels of skill are very very different. Couple weeks back I met a gent named Hasan, Hasan builds coils and goes by the name of Crafted Coils, great guy, I was surprised at how much he was willing to help. Anyway he gave me a quick tutorial on how to get my multi cores from twisting and climbing all over each other and also on how to learn how much tension to put on the clapton wrap wire. Today for the very first time I wanted to try out a tri core alien (3 x 29ga with 38ga alien), this tested my patience as first I stretched out the de-cored clapton too much so the wraps were pretty much the same as a normal clapton would be, I tried again, got the stretch right but while wrapping, if I adjusted my grip on the wire even a little I ended up wrapping over the previous wraps. Some wire, swearing and deep breaths later I'm proud of my accomplishment. I've finally managed to make 2 near perfect aliens and these last 2, once I got a feel for it took me but 10 minutes.View attachment 97518 View attachment 97519

As with everything in life... patience is key brother. That's a beautiful pair of coils.


Sent from my iPhone using Tapatalk
 
fc95b4823eef392f0acd7c194a0460be.jpg


Built this the other evening:

22ga Haywire Flatwire; 8 wrap; 3mm id; reading at 0.20 ohms


Sent from my iPhone using Tapatalk
 
Looks really good, I've never used flat wire, how does it compare to reg Clapton etc?

Thanks man!

So from normal round wire, I moved to flatwire and didn't really experiment much with claptons, etc.

What I can say is that the ramp up is superb, so is the flavour


Sent from my iPhone using Tapatalk
 
Back
Top