Dem builds

[Shasta]

Keeping busy on a Saturday with some wire laying around

 

[Dreadside]

Played around with some coils and this was the most exiting one I have today.
3*28g ni80 wrapped in 38g ni80

 

[Stranger]

Some serious skills on display here.

 

[Shasta]

Some messing around with the Zeus mesh deck

 

[Stew]

Some messing around with the Zeus mesh deckView attachment 208405 View attachment 208406

How did it vape?

 

[Dreadside]

Little flavour monster!
Fralien 4 * .5mm ribbon framed with 28g and alien with some 38g 6 wraps all Ni80.

 

[Dreadside]

Little flavour monster!
Fralien 4 * .5mm ribbon framed with 28g and alien with some 38g 6 wraps all Ni80.
View attachment 208474

Loving the luna by the way, qp it's nice but the wasp rda is better imo, like a cold vape with a long draw

 

[Shasta]

How did it vape?

The flavour wasn't great and it actually made pretty good clouds.

 

[Stew]

I saw a nice tip in another program where they used "Double coil spring lock washers" to keep the strands of wire aligned while applying the wrap wire. Thought you builders could use the tip. The person just wedged the washer open with a flat screwdriver while sliding it on the strands. PS. A used washer is often flattened so the surfaces are almost touching and you get them with almost full double coils which would be better balanced. The image looks big but you get quite small ones.

 

[Stew]

I managed to capture a few screen shots. No link available for the tutorial.

 

[Shasta]

I managed to capture a few screen shots. No link available for the tutorial.

Excellent stuff man!!!

 

[Stew]

Could someone please tell me the reason why in some videos say for example they want a 5 wrap coil, they wrap 7 wraps and under tension pull the one end to unravel 2 wraps. Does it tighten the coil tolerance closer to the desired ID?
Thanks.

 

[Stew]

Could someone please tell me the reason why in some videos say for example they want a 5 wrap coil, they wrap 7 wraps and under tension pull the one end to unravel 2 wraps. Does it tighten the coil tolerance closer to the desired ID?
Thanks.

Bump.

 

[Friep]

Could someone please tell me the reason why in some videos say for example they want a 5 wrap coil, they wrap 7 wraps and under tension pull the one end to unravel 2 wraps. Does it tighten the coil tolerance closer to the desired ID?
Thanks.

It does bring it closer to the desired ID also sometimes the first wrap is not as close to the other wraps or at a weird angle and this unwrapping makes it a bit neater. Some builders also do this to line up the outer wrap etc

 

[Stew]

It does bring it closer to the desired ID also sometimes the first wrap is not as close to the other wraps or at a weird angle and this unwrapping makes it a bit neater. Some builders also do this to line up the outer wrap etc

Thanks very much @Friep

 

[Mollie]

3x28 AWG Ni80 and aliens are 34AWG Ni80.

It's been awhile

Thanks for the advise on your build
I build a coil as per your specs and I must say much easier to stretch and alien the cores and so far the best flavour I got

So I made some more today for the attys
I'm really impressed
Thanks alot

 

[Spectator]

Could someone please tell me the reason why in some videos say for example they want a 5 wrap coil, they wrap 7 wraps and under tension pull the one end to unravel 2 wraps. Does it tighten the coil tolerance closer to the desired ID?
Thanks.

It dose work yes. The wire hase a bit of spring in its step when you coil it ant when you "un wrap" it you put tension on the wraps witch make it titter but only if you hold the other leg

 

[vicTor]

It dose work yes. The wire hase a bit of spring in its step when you coil it ant when you "un wrap" it you put tension on the wraps witch make it titter but only if you hold the other leg

hell, I better get into making coils if it involves titter's !

 

[Spectator]

hell, I better get into making coils if it involves titter's !

Ja ja ja

 

[Resistance]

Stagered fused all 30G SS
Not perfect. I'm blaming the square type spools.

 

[Speedy_11]

Good day all,where do you guys recommend buy the wire and what do you recommend starting out with.i want to go with the NI80

 

[Resistance]

Good day all,where do you guys recommend buy the wire and what do you recommend starting out with.i want to go with the NI80

I bought last at a vape shop that's not a member of Ecigssa ,but it can be bought at most Vape shops. Juicy Joe's, vape king etc.

 

[Speedy_11]

I bought last at a vape shop that's not a member of Ecigssa ,but it can be bought at most Vape shops. Juicy Joe's, vape king etc.

have u ever heard of this:
Lemaga Ni200 Wire 26G 10M

 

[Resistance]

have u ever heard of this:
Lemaga Ni200 Wire 26G 10M

Not that brand, but if it's from a reputable vendor then I don't see why not.

 

[Speedy_11]

Not that brand, but if it's from a reputable vendor then I don't see why not.

Thanks,yes vapeking