Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
npw where do we get them
I see the shop in Melrose arch sells them for R.1000 !
It's been long overdue
I got the Lemo working finally.
I tried the initial build out the box but it was terrible despite the coil looking so pretty and the cotton being so nicely packed in.
2 sunlight washes later and standing for a while to dry I finally got round to coiling this famous RTA
Bottom line initial impression - I don't like the taste. I probably need more experimentation.
Just a bit of background. I wanted this tank as an easy grab n vape solution at my desk for a lowish power on one of my mentholated fruity juices instead of my Evod1 which I have to refill too often.
Initial build:
28g Vapowire
7 wraps
1.5mm iD
Came out at 1.1 ohms
View attachment 19075
I wicked with organic cotton. Did it according to RipTripper. Snipped at about chimney height then tucked in and lubed it nicely.
Using the Smok M50
View attachment 19076
The mighty evod1/MVP lurks in the background
Juice in both is identical. Vapour Mountain Strawberry 18mg with added VM Menthol Concentrate drops.
The taste is bleh. I'm not getting a nice crisp taste like on the Evod1. Not getting that cold menthol blast nearly like in the Evod1. Maybe it's the cotton in the Lemo vs the silica wick in the Evod1.
15 Watts seems to be the best setting for this setup. The least bleh. 10 watts is too low. 20 watts is ok but I start getting some afterburner. And at 30 Watts it's a bit of a burnt taste.
Unless my wicking is really bad I am thinking my Lemo experience is probably just going to be an interesting experience and not what I had hoped for.
By the way, the Lemo is dumb in many ways. Airflow control that changes by itself. Not easy to trap the coil on the screws. Fill port that needs a syringe or a thin tip bottle. And of course, trying to empty the tank if I want to rewick. What a pain compared to my usual REO setups.
I don't doubt that the Lemo could be set up better than I have it but at this point I can say despite me trying hard and being careful, the vape is not as good as my Evod1 and nowhere near my REO/RM2.
It's been long overdue
I got the Lemo working finally.
I tried the initial build out the box but it was terrible despite the coil looking so pretty and the cotton being so nicely packed in.
2 sunlight washes later and standing for a while to dry I finally got round to coiling this famous RTA
Bottom line initial impression - I don't like the taste. I probably need more experimentation.
Just a bit of background. I wanted this tank as an easy grab n vape solution at my desk for a lowish power on one of my mentholated fruity juices instead of my Evod1 which I have to refill too often.
Initial build:
28g Vapowire
7 wraps
1.5mm iD
Came out at 1.1 ohms
View attachment 19075
I wicked with organic cotton. Did it according to RipTripper. Snipped at about chimney height then tucked in and lubed it nicely.
Using the Smok M50
View attachment 19076
The mighty evod1/MVP lurks in the background
Juice in both is identical. Vapour Mountain Strawberry 18mg with added VM Menthol Concentrate drops.
The taste is bleh. I'm not getting a nice crisp taste like on the Evod1. Not getting that cold menthol blast nearly like in the Evod1. Maybe it's the cotton in the Lemo vs the silica wick in the Evod1.
15 Watts seems to be the best setting for this setup. The least bleh. 10 watts is too low. 20 watts is ok but I start getting some afterburner. And at 30 Watts it's a bit of a burnt taste.
Unless my wicking is really bad I am thinking my Lemo experience is probably just going to be an interesting experience and not what I had hoped for.
By the way, the Lemo is dumb in many ways. Airflow control that changes by itself. Not easy to trap the coil on the screws. Fill port that needs a syringe or a thin tip bottle. And of course, trying to empty the tank if I want to rewick. What a pain compared to my usual REO setups.
I don't doubt that the Lemo could be set up better than I have it but at this point I can say despite me trying hard and being careful, the vape is not as good as my Evod1 and nowhere near my REO/RM2.
Thanks for your impressions. Yeah, I also tried a few RTAs, but always too much trouble compared to bf even if the taste is good.It's been long overdue
I got the Lemo working finally.
I tried the initial build out the box but it was terrible despite the coil looking so pretty and the cotton being so nicely packed in.
2 sunlight washes later and standing for a while to dry I finally got round to coiling this famous RTA
Bottom line initial impression - I don't like the taste. I probably need more experimentation.
Just a bit of background. I wanted this tank as an easy grab n vape solution at my desk for a lowish power on one of my mentholated fruity juices instead of my Evod1 which I have to refill too often.
Initial build:
28g Vapowire
7 wraps
1.5mm iD
Came out at 1.1 ohms
View attachment 19075
I wicked with organic cotton. Did it according to RipTripper. Snipped at about chimney height then tucked in and lubed it nicely.
Using the Smok M50
View attachment 19076
The mighty evod1/MVP lurks in the background
Juice in both is identical. Vapour Mountain Strawberry 18mg with added VM Menthol Concentrate drops.
The taste is bleh. I'm not getting a nice crisp taste like on the Evod1. Not getting that cold menthol blast nearly like in the Evod1. Maybe it's the cotton in the Lemo vs the silica wick in the Evod1.
15 Watts seems to be the best setting for this setup. The least bleh. 10 watts is too low. 20 watts is ok but I start getting some afterburner. And at 30 Watts it's a bit of a burnt taste.
Unless my wicking is really bad I am thinking my Lemo experience is probably just going to be an interesting experience and not what I had hoped for.
By the way, the Lemo is dumb in many ways. Airflow control that changes by itself. Not easy to trap the coil on the screws. Fill port that needs a syringe or a thin tip bottle. And of course, trying to empty the tank if I want to rewick. What a pain compared to my usual REO setups.
I don't doubt that the Lemo could be set up better than I have it but at this point I can say despite me trying hard and being careful, the vape is not as good as my Evod1 and nowhere near my REO/RM2.
What is the big deal with the Reo? Its just a dripper, without the need to drip, right? in terms of the vape quality, I mean.
What is the big deal with the Reo? Its just a dripper, without the need to drip, right? in terms of the vape quality, I mean.
Well, the Reo is just the bottom feeding device actually, which gives you the ease and the convenience and the ruggedness. The bottom fed dripper on top is, as you rightly point out, is what makes the vape. And yes, dripper quality vape, with one slight difference: must less wicking required and much less juice in the juice well. You squonk, the wick is saturated, the extra juice is sucked back into the bottle, you vape. So, fresh juice on the wick all the time.What is the big deal with the Reo? Its just a dripper, without the need to drip, right? in terms of the vape quality, I mean.
@Silver it sounds to me, more like a Kayfun V4 clone would be better suited? because you can tweak your build and wick on that without having to drain the tank.
It's been long overdue
I got the Lemo working finally.
I tried the initial build out the box but it was terrible despite the coil looking so pretty and the cotton being so nicely packed in.
2 sunlight washes later and standing for a while to dry I finally got round to coiling this famous RTA
Bottom line initial impression - I don't like the taste. I probably need more experimentation.
Just a bit of background. I wanted this tank as an easy grab n vape solution at my desk for a lowish power on one of my mentholated fruity juices instead of my Evod1 which I have to refill too often.
Initial build:
28g Vapowire
7 wraps
1.5mm iD
Came out at 1.1 ohms
View attachment 19075
I wicked with organic cotton. Did it according to RipTripper. Snipped at about chimney height then tucked in and lubed it nicely.
Using the Smok M50
View attachment 19076
The mighty evod1/MVP lurks in the background
Juice in both is identical. Vapour Mountain Strawberry 18mg with added VM Menthol Concentrate drops.
The taste is bleh. I'm not getting a nice crisp taste like on the Evod1. Not getting that cold menthol blast nearly like in the Evod1. Maybe it's the cotton in the Lemo vs the silica wick in the Evod1.
15 Watts seems to be the best setting for this setup. The least bleh. 10 watts is too low. 20 watts is ok but I start getting some afterburner. And at 30 Watts it's a bit of a burnt taste.
Unless my wicking is really bad I am thinking my Lemo experience is probably just going to be an interesting experience and not what I had hoped for.
By the way, the Lemo is dumb in many ways. Airflow control that changes by itself. Not easy to trap the coil on the screws. Fill port that needs a syringe or a thin tip bottle. And of course, trying to empty the tank if I want to rewick. What a pain compared to my usual REO setups.
I don't doubt that the Lemo could be set up better than I have it but at this point I can say despite me trying hard and being careful, the vape is not as good as my Evod1 and nowhere near my REO/RM2.
Just a thought, have you tried a tighter (more restrictive) drip tip? Ones with a smaller diameter tend to improve flavour slightlyLol @Raslin
I used to build coils for the Evod. In fact, @BhavZ and i spent many long phone calls this time last year debating the merits of grommets and how to wick it. Lol, those were great times.
But i am now using the Evod with stock 1.8 ohm Kanger coils. And i have found that for the mentholated simple fruity juices it just produces such marvellous flavour. Could be the plastic, could be the shape of the driptip or the tight draw. And very possibly the silica wick that is doing it for me in the stock coils.
I am not suggesting that the Evod is better than the Lemo. Just for this juice and for my taste and application. (Mindless vaping)
I was hoping to tune the Lemo into a larger capacity Evod. But i guess that is not going to be easy.
I vape my lemo on 60watts with no dry hits. Its all about the coil.Lol, after writing all these posts I just picked up the Lemo
Turned it down to 12.5 Watts and vaped about 10 puffs (not in a row)
No more dry hits
Strange