Here is a picture presentation/review of a good looking and well designed RDA I found on the interwebz, followed by a video review. I was intrigued by the airflow design of this beauty. Not to mention the drip well... I hope some of you find it interesting.
Magma by Paradigm (clone by Infinite)
This was purchased from 101vapes for $27.99 plus $1.99 shipping. It shipped May 22 and arrived the 24th in a bubble-wrap envelope with more bubble wrap around the box.
Box contents
The RDA comes in a sealed bag that I've already removed as well as a small bag of goodies.
Bag contents:
-2 pre-wrapped coils (probably will never use) -1 small flat head screw driver
The atomizer broken down
From left to right we have: airflow ring, deck and top cap. Really impressed with the machining.
The airflow ring
The ring contains 3 different sized airflow holes (1mm, 2mm, 3mm) that can support airflow for single or dual coil builds.
The top cap
The front logo.
Back of top cap
The back logo.
Top side of cap
Underside of cap
The reduced chamber has a cone design that makes for fantastic flavor.
The deck
This is a two post design so one is positive and the other negative. It can be setup for single or dual coal. The holes through the posts are big enough that I had no trouble with dual 28g wire.
The drip well
The drip well in this thing is insane. I can easily get 40+ drops in it.
A quick build
Dual coil 5 wraps of 28g.
Coil placement is great
With the coils right over the airflow channels, this thing produces some of the best flavor I've had dripping. The air flow design reminds me a lot of the kayfun/russian design.
Wicking
Using organic cotton into the juice well I don't run into any issues with dry hits.
Vapor chucking beauty
How she looks on top of the nemesis
The airflow ring is locked in place by the top cap which is threaded as appose to o-rings which I actually prefer.
Trying the magma out with a few different drip tips
Tip from the kfl+
With the Goliath Drip Tip by Centuri
22mm pyrex overkill
Not practical for out and about but something fun for lounging with a few beers.
And finally a video review
Magma by Paradigm (clone by Infinite)
This was purchased from 101vapes for $27.99 plus $1.99 shipping. It shipped May 22 and arrived the 24th in a bubble-wrap envelope with more bubble wrap around the box.
Box contents
The RDA comes in a sealed bag that I've already removed as well as a small bag of goodies.
Bag contents:
-2 pre-wrapped coils (probably will never use) -1 small flat head screw driver
The atomizer broken down
From left to right we have: airflow ring, deck and top cap. Really impressed with the machining.
The airflow ring
The ring contains 3 different sized airflow holes (1mm, 2mm, 3mm) that can support airflow for single or dual coil builds.
The top cap
The front logo.
Back of top cap
The back logo.
Top side of cap
Underside of cap
The reduced chamber has a cone design that makes for fantastic flavor.
The deck
This is a two post design so one is positive and the other negative. It can be setup for single or dual coal. The holes through the posts are big enough that I had no trouble with dual 28g wire.
The drip well
The drip well in this thing is insane. I can easily get 40+ drops in it.
A quick build
Dual coil 5 wraps of 28g.
Coil placement is great
With the coils right over the airflow channels, this thing produces some of the best flavor I've had dripping. The air flow design reminds me a lot of the kayfun/russian design.
Wicking
Using organic cotton into the juice well I don't run into any issues with dry hits.
Vapor chucking beauty
How she looks on top of the nemesis
The airflow ring is locked in place by the top cap which is threaded as appose to o-rings which I actually prefer.
Trying the magma out with a few different drip tips
Tip from the kfl+
With the Goliath Drip Tip by Centuri
22mm pyrex overkill
Not practical for out and about but something fun for lounging with a few beers.
And finally a video review
Last edited:
