Peter's Vaping Journal

i really really dont like the taste of cotton, its too much for me, i prefer the silica.
once i get some 28G ill build a 2mm ID micro coil and use some or other tool to loop 3 strands of silica through it.

edit:
but that being said this franken coil is doing the job for now....not a bad vape at all :)

Must be something odd with my tastebuds, because I have tried both many times. And I can't really tell the difference between the two. I just prefer cotton because it's easier to wick with a micro coil.
 
Do not be intimidated by the cotton lovers, there are quite a lot of vapers, myself included, that are not that mad about the initial industrial taste of cotton.
 
ok so 3 hours into using my Kayfun (2.5Ohm coil on 8w on top on the MVP) and i must say i am really enjoying this.
the pull is so smooth and loose, when i asked my wife for a puff on her PT3 it felt so tight, like trying to suck a wimpy double milkshake through a tiny straw.
 
ok so 3 hours into using my Kayfun (2.5Ohm coil on 8w on top on the MVP) and i must say i am really enjoying this.
the pull is so smooth and loose, when i asked my wife for a puff on her PT3 it felt so tight, like trying to suck a wimpy double milkshake through a tiny straw.

Indeed, I can't use any of those commercial things anymore. Once you experience a good RTA/rba there's no going back. ;)
 
Do not be intimidated by the cotton lovers, there are quite a lot of vapers, myself included, that are not that mad about the initial industrial taste of cotton.
And then on the other hand, I can't stand silica and ecowool. And that is why vaping is so cool!
Whatever works for you, go with it. Tried silica many a times and after the first toot I rip the coil out and micro it with a cotton. :)
 
Congrats on your journey @PeterHarris
Its all about learning what you like
And I think you are doing a damn fine job at that thus far.
Well done.
 
i still dont know exactly what my kayfun is? is it a clone or an original or what lol

i see there is a Taifun aswell lol

any ways - i am still really enjoying this RBA - i got some pina colada in and im in heaven, its certainly my favorite juice so far.

and i did stop by VK today and got myself a exhaust style drip tip and a M-tank kit for the Kayfun.
decided to go with just the outer clear tank and leave everything else steel.
While i was at VK I tested or fitted the kayfun on the SID mod, and i was not too pleased with the looks. It seems that i will have to hold up and wait to get a sigelei :)

some pics as always :)

10369914_10152466086002533_3204388873309800826_n.jpg
10173547_10152466086512533_8194131526908737379_n.jpg
 
i still dont know exactly what my kayfun is? is it a clone or an original or what lol

i see there is a Taifun aswell lol

any ways - i am still really enjoying this RBA - i got some pina colada in and im in heaven, its certainly my favorite juice so far.

and i did stop by VK today and got myself a exhaust style drip tip and a M-tank kit for the Kayfun.
decided to go with just the outer clear tank and leave everything else steel.
While i was at VK I tested or fitted the kayfun on the SID mod, and i was not too pleased with the looks. It seems that i will have to hold up and wait to get a sigelei :)

some pics as always :)

10369914_10152466086002533_3204388873309800826_n.jpg
10173547_10152466086512533_8194131526908737379_n.jpg

Your Kayfun looks awesome @PeterHarris. Just to clear it up. That's a Clone of the Kayfun 3.1. The Taifun GT is a different tank altogether.

So you want an upgraded mod to fire your Kayfun. As I recall you didn't like the mech much because the output was to powerful. The Sigelei 20W is certainly a great option but the biggest reason it's so expensive is because of the increased 20W limit. If you're only vaping at 15W or less I'd like to suggest some other options.

@Rob Fisher got the Sigelei Z-Max a while back and thought very highly of it. Here's his review. Skybluevaping had them in stock but I'm not sure where to find one locally at this stage.

The Vamo is another excellent mod worth considering. @denizenx did a review of the V2 here. You can find the upgraded V5 at Eciggies here.

Then there's the SVD. A killer mod for sure. I had this and loved it. Menu system might not be for everyone but I was very comfortable with it. Find it here, also at Eciggies.

These devices are all limited to 15W and look awesome with a Kayfun. So unless you really want that extra 5W, you might be able to save some hard earned cash by opting for one of the above.
 
ok, so i was at VK and @Stroodlepuff kindly let me fit my kayfun on the SVD, and man i must say, it looked sweet! Sadly they didnt have any stock.... but i called my dealer, and he has....so im just waiting for the trafic to calm down and then im going to fetch my light saber......

"Luke, i am a Vaper"

ff8576f6c818c60142dad59dc2d0f0fe430242ca58d8a42f353a95282fb4ceea.jpg
 
so i was playing with my new SVD last night, obviously trying to figure out how to adjust the settings without reading the instructions, lol. i figured it out eventually.
played with it at 15W and burnt my coil/wick :(

id like to know what is the max what you can push to a silica coil? maybe it was that the bow tie ribbon method is not for 15w...

anyway i was not too bumbed about it as this gave me a very good excuse to try and build the navy's-nest coil :)

i did a 5/4 wrap on a 2mm drill with 32G and it came to a nice 1.8Ohm :) the nice thing about this wicking method is that i used a 2mm ID and 2mm silica, so i could do the coil on a nice drill bit and not on the silica directly, unfortunately becuase i used 32G i could not do a micro coil as the coverage area spread would be too little, i'll do a micro once i get some 28G

and it vapes lekka, i think im gona stick with this wicking method for now..



10373736_10152468417887533_4794728173973254861_n.jpg
 
ok update - i think i messed up the wicking on this navy's nest :(

every so often i get a dry burnt taste

im thinking either the silica is not down all the way to the base, or the 1 strand of silica simply doesnt hold enough juice for my furious constant puffing. im quite sure its the latter as im sure i pressed the silica all the way down....

im going to go back to the bow tie method.....

will keep you informed
 
so i did what i said :)

i chucked out the navy's-nest and redid a bow-tie coil, and you know what, it came out even better than my 1st one which was 2,5Ohm. this one is 1.8Ohm 5/4 wraps straigt onto 3 strands of 2mm silica with 32G kanthal :)

boom back in vape bliss.

while i was down there i decided to give the clear chamber a go aswell, while still using the steel chimney, and my o my it looks so gadgety, if thats even a word....

the bow-tie:
10298865_10152469758837533_8994769407834046723_n.jpg


clipped of the remaining wire and extra silica, as i just want the loops:
10173625_10152469758942533_5364344766091421190_n.jpg


all tucked in nicely into the clear chamber: (the 5 wraps are on the bottom)
1506854_10152469759037533_8175928315862926604_n.jpg


and this is how she looks.... the gadgety look haha
1622189_10152469759092533_3830647867610583589_n.jpg
 
Last edited:
i must say i do like the clear tanks , they do look the sniz
 
ok so i thought its time for a mini update.

still on the Kayfun 3.1 and really getting the hang of refilling from the top.
the SVD mod looks awesome, but i must admit, then in 650 mode it is a bit big and uncomfy
i need/want something that is pratical size but still powerfull.
Seeing as my coils that i build are 1.5Ohm or above, and i never go above 9w, i went back to my MVP, its just so comfy.
i was thinking of using the SVD in 350 mode, but i dont want to walk arround with a battery belt that looks like im carrying shot-gun ammo :p

so i have decided to sell the SVD and batteries
 
Last edited:
Back
Top