Reo Mail

Quick question. When you remove the delerin insert to replace the tube how do you get it to go all the way back up again? My delerin insert is about 1 mm off.

Edit: I think the problem is to insert the delerin insert, tighten gently and then put the feed tube back on.
I have been putting the feed tube on and then inserting the delerin insert.

Just push the delrin insert with your thumb as far as it can go and lightly screw down. First put in the silicone tube and then fit the delrin.
 
Just push the delrin insert with your thumb as far as it can go and lightly screw down. First put in the silicone tube and then fit the delrin.
Ok so the not exactly flush delerin fit is normal then. Actually is less than a mm off but I was wondering if it's normal. The reo still works nevertheless.
 
That screw, in the delrin piece. Always be careful to use a light finger touch when tightening.
 
That screw, in the delrin piece. Always be careful to use a light finger touch when tightening.

What @Alex is saying here is very important @Christos

Don't overtighten the screw that holds the Delrin plate in place otherwise you will strip the threading on the soft aluminium of the Reo body where the screw goes in. If that happens, its a big problem.

Rather don't remove that Delrin cover unless you absolutely have to
 
What @Alex is saying here is very important @Christos

Don't overtighten the screw that holds the Delrin plate in place otherwise you will strip the threading on the soft aluminium of the Reo body where the screw goes in. If that happens, its a big problem.

Rather don't remove that Delrin cover unless you absolutely have to
I saw the finger tight a few times.

I just thought it would be easier to wash with everything off.
 
I saw the finger tight a few times.

I just thought it would be easier to wash with everything off.

Look, I am no expert when it comes to the technicals of the Reo and maintenance etc
But I would humbly suggest not removing that Delrin plate to wash it
Maybe once in a long while, but not regularly
 
Look, I am no expert when it comes to the technicals of the Reo and maintenance etc
But I would humbly suggest not removing that Delrin plate to wash it
Maybe once in a long while, but not regularly
Noted. Thanks.
 
Quick question. When you remove the delerin insert to replace the tube how do you get it to go all the way back up again? My delerin insert is about 1 mm off.

Edit: I think the problem is to insert the delerin insert, tighten gently and then put the feed tube back on.
I have been putting the feed tube on and then inserting the delerin insert.
Thank you so much for that solution. All of my delrin inserts are a bit off - now I know why!
 
Rather overdue but my 1 year stinky-free-vapeversary-from-me-to-me present…

IMG_6947.JPG

Initially with my first crappy build I was like WTF, this thing capes like a CE4! But then I threw in a dual 2.5mm 26g build coming in at 0.3ohm with some Pining Juliette 6mg. Man ohh man, after the first hit I knew the hype was real! Vaping on a REO is a thing of beauty.

My one and only complaint is that I now need a second REO in my life:BIGTEARS:
 
Rather overdue but my 1 year stinky-free-vapeversary-from-me-to-me present…

View attachment 34392

Initially with my first crappy build I was like WTF, this thing capes like a CE4! But then I threw in a dual 2.5mm 26g build coming in at 0.3ohm with some Pining Juliette 6mg. Man ohh man, after the first hit I knew the hype was real! Vaping on a REO is a thing of beauty.

My one and only complaint is that I now need a second REO in my life:BIGTEARS:
A week ago I was so happy with my first reo. 5 days later I got a second one.
IMG-20150808-WA0001.jpg
 
Rather overdue but my 1 year stinky-free-vapeversary-from-me-to-me present…

View attachment 34392

Initially with my first crappy build I was like WTF, this thing capes like a CE4! But then I threw in a dual 2.5mm 26g build coming in at 0.3ohm with some Pining Juliette 6mg. Man ohh man, after the first hit I knew the hype was real! Vaping on a REO is a thing of beauty.

My one and only complaint is that I now need a second REO in my life:BIGTEARS:
Love the colour combo, and all the best with her.
 
Congrats on the 1 year @Ricgt
Awesome present!
She looks great and I agree with @Alex, that colour combo is fantastic
 
Congrats on the 1 year @Ricgt
Awesome present!
She looks great and I agree with @Alex, that colour combo is fantastic

if the door had racing stripes I could see a certain
White%20tailed%20bumble%20bee%20low%20res.jpg
with his name on it.
 
Rather overdue but my 1 year stinky-free-vapeversary-from-me-to-me present…

View attachment 34392

Initially with my first crappy build I was like WTF, this thing capes like a CE4! But then I threw in a dual 2.5mm 26g build coming in at 0.3ohm with some Pining Juliette 6mg. Man ohh man, after the first hit I knew the hype was real! Vaping on a REO is a thing of beauty.

My one and only complaint is that I now need a second REO in my life:BIGTEARS:

Wow loving the color combo :clap:

Congratulations on your vapeversary :party: :rock:
 
Rather overdue but my 1 year stinky-free-vapeversary-from-me-to-me present…

View attachment 34392

Initially with my first crappy build I was like WTF, this thing capes like a CE4! But then I threw in a dual 2.5mm 26g build coming in at 0.3ohm with some Pining Juliette 6mg. Man ohh man, after the first hit I knew the hype was real! Vaping on a REO is a thing of beauty.

My one and only complaint is that I now need a second REO in my life:BIGTEARS:
Most welcome to Reoville. Beautiful Reo. Congrats and enjoy. Remember to give the Reo some Noalox love every week at those ohms. Here is your official Reonaut badge:

ZtRsnxF.jpg
 
Reo accessories pickup from Vapeclub.

Thanks @JakesSA and @VapeGrrl the rogue is amazing and your workmanship even more amazing.

The velocity is not bad but it is asking for a clapton build :party:

I'm just not sure if I should go black rda on black reo and silver on silver or leave the current configuration.

Poor derringer is going to be benched. 20150825_172741.jpg

Big up again to vapeclub.
 
Lol @Viper_SA. I like it's small form factor.
I think I'm going to keep all my gear for a while. If I sell it I'll be tempted to replace it with something else.
 
Reo accessories pickup from Vapeclub.

Thanks @JakesSA and @VapeGrrl the rogue is amazing and your workmanship even more amazing.

The velocity is not bad but it is asking for a clapton build :party:

I'm just not sure if I should go black rda on black reo and silver on silver or leave the current configuration.

Poor derringer is going to be benched. View attachment 34515

Big up again to vapeclub.
Those attys/REOs look awesome as they are but if you do get bored with the combination`s it`s just a matter of swapping them around;). Silver streak in one hand and stealth ninja in the other:mask:
IMHO the best part of vaping is finding the perfect coil build and wick to go with the perfect atty and juice. And once you get that right, it`s like nirvana......until the next best thing that hits the market:D.
 
Reo accessories pickup from Vapeclub.

Thanks @JakesSA and @VapeGrrl the rogue is amazing and your workmanship even more amazing.

The velocity is not bad but it is asking for a clapton build :party:

I'm just not sure if I should go black rda on black reo and silver on silver or leave the current configuration.

Poor derringer is going to be benched. View attachment 34515

Big up again to vapeclub.
Great stuff, I am a big Rogue fan. The Velocity for me was just too big on the Reo - so using it as a normal dripper atm. My taste - black on black and silver on silver, but then I am colour blind so no benchmark.
 
It moved to black on black and silver on silver 5 mins after I took the photo. I'm loving the rogue except the negative posts that need to be wound around the screw.
 
Back
Top