Reo Mail

The Derringer top cap got a little darker on the wire brush, but like to look with the tumbled Reo. I do get much higher voltage drop than other users state though. At 0.3 Ohm I measure 3.2V on the atty while firing with dual coils. This seems to be the norm on mech's with lowish builds though, all my mech's drop off quite a bit.
 
Ps @Viper_SA, I did a dual coil as you said. Flavour is better at .5 ohms only difference is I used very little cotton.

Problem now is I can't stealth vape in the office anymore. Nice clouds and nice flavour.
 
@Christos jus did a dual coil, 2mm ID, 24G and 7 wraps each, coming to 0.31 Ohm. For thejuice I'm using, I get better flavor from the 2mm than the 3mm, which surprised me since the last time I tested the juice was on dual coil 22G at around 0.2 Ohm and 3mm. But then it was a 0mg nic juice and this one is 3mg.

EDIT: 2.4mm, not2mm
 
Last edited:
@Christos jus did a dual coil, 2mm ID, 24G and 7 wraps each, coming to 0.31 Ohm. For thejuice I'm using, I get better flavor from the 2mm than the 3mm, which surprised me since the last time I tested the juice was on dual coil 22G at around 0.2 Ohm and 3mm. But then it was a 0mg nic juice and this one is 3mg.

EDIT: 2.4mm, not2mm
Was reading the derringer rda thread and I realised the problem has already been stated. Less wick. I was jamming the wick in there like I do in my plume veil but kept getting muted flavor. Now the wick just touched the base - no cotton packing and it tastes great.
2.5mm id
7 wraps
24 awg
Dual coil
.5 ohms
 
Was reading the derringer rda thread and I realised the problem has already been stated. Less wick. I was jamming the wick in there like I do in my plume veil but kept getting muted flavor. Now the wick just touched the base - no cotton packing and it tastes great.
2.5mm id
7 wraps
24 awg
Dual coil
.5 ohms
Yip, with bf you need much less wicking.
 
Congrats @Viper_SA , classic stunner!
Wish you well with her!
 
@Christos our builds are quite similar, wonder why there is a 0.2 Ohm difference. Maybe my meter is not too accurate
 
@Christos our builds are quite similar, wonder why there is a 0.2 Ohm difference. Maybe my meter is not too accurate
I doubt it's your meter. I just popped it onto my siglei and fired it a few times. That's the reading I get on the siglei.

Other thing might be that it was probably 7 and 3/4 wraps as I only counted full wraps.
 
Whoopeeee! I picked up my RM2 from the Reo Round 5 order, from @Oupa last night. What a beautiful atty. I bought my Reo secondhand with a RM3 that I have been enjoying a lot, but the RM2 is the "Original" and I had to have it.

@Oupa shared all his tips and tricks for coiling and wicking the RM2 and also gave me some ekowool on the house - much, much appreciated. Well I got home and immediately got to work on the coil. Burned the ekowool until it was red hot and then did a simple 5-wrap ugly coil around the ekowool, using 28g kanthal. I must say that it is very easy to build on this deck. The whole process probably took no more than 5 minutes.

First off, the airflow is a lot tighter than the RM3. It reminds me of the Mini Protanks. But...........I love it!!!! I had some Banana Cream in the Reo bottle that I was vaping on the RM3 during the day and it was awesome to compare the two atties. The RM2 seems to smooth out the flavours. Flavour is absolutely fantastic. Not near as much clouds as the RM3, but that doesn't bug me. I am a mouth to lung vaper and probably always will be. I love the white ceramic deck. When I remove the drip tip and look inside the atty, I can see exactly what is going on.

I am so happy with my purchase and honestly can't see myself getting any new hardware in the near future. Well, maybe a Reo Mini. I was admiring @Oupa 's one last night. It is stunning!

So happy for you @Mufasa !
The RM2 may be humble but its just brilliant for mouth to lung
You are so right about being able to see the juice while squonking on the white ceramic deck
Enjoy!
 
My reo mail I picked up today. She literally was brand new.
Chris2.jpg

Gave her a clean and a new bottle and tube and a new hot spring.
Here she is with the other reo.
Chris3.jpg

Waiting on @JakesSA for the rogue bf RDA.

I suspect the secret porcupine will need to make an appearance since posting from my phone seems to upload the files skew. Secret Porcupine was here! ;-)
 
Last edited by a moderator:
My reo mail I picked up today. She literally was brand new.

View attachment 34358
Gave her a clean and a new bottle and tube and a new hot spring.View attachment 34358
Here she is with the other reo.

Waiting on @JakesSA for the rogue bf RDA.

I suspect the secret porcupine will need to make an appearance since posting from my phone seems to upload the files skew.


Super Light is the way to go and that black one is sick :rock:

Congrats bud :clap:
 
Congrats @Christos
Wishing you all the best with her
She looks stunning
Many happy vapes!
 
My reo mail I picked up today. She literally was brand new.
View attachment 34367

Gave her a clean and a new bottle and tube and a new hot spring.
Here she is with the other reo.
View attachment 34368

Waiting on @JakesSA for the rogue bf RDA.

I suspect the secret porcupine will need to make an appearance since posting from my phone seems to upload the files skew. Secret Porcupine was here! ;-)
Great stuff. Congrats. Rogue is one of my favourites. Ask @JakesSA to put a PEEK insulator in there for you.
 
Why a peek insulator? What are the advantages?
Well I assume it will insulate the reo from some of the heat from the rda.

PEEK (Polyether ether ketone) can take very high heat (melting point is 343 C). So, if you have a PEEK insulator around the center pin in your atomizer you are assured the heat of your coils (especially at high power) will not melt the insulator. The Reo firing buttons are made of PEEK.

Most good atomizers come with PEEK insulators nowadays, usually specified.
 
Quick question. When you remove the delerin insert to replace the tube how do you get it to go all the way back up again? My delerin insert is about 1 mm off.

Edit: I think the problem is to insert the delerin insert, tighten gently and then put the feed tube back on.
I have been putting the feed tube on and then inserting the delerin insert.
 
Last edited:
Back
Top