Reo P 67
- Thread starter DoubleD
- Start date
hehe, I saw, I got a green monster already
to all those in SA who scored P67's from this short run.The ReoMeister didn't think you folks had much of a chance of scoring any of them back when I called him to get the story on the short run (and the later huge run that is coming) for you folks in SA. So I assume he is surprised you got so many same as I am (there was only going to be about 20 of them).
Hope they will be game changers for you like my 4 from the first run were. The 9 of 32 Reos currently in service on my desk include those 4 P67's, with 2 of them running Hadaly's some of the time with 2015 Mech Reo Woodvil's sharing that squonk duty with them. I will eventually try one of the Kryten's on one of them for a bit as well (yes they fit just fine), but I see the Kryten's running monster super sub ohm builds on reg mods around here more than on the Reos (unless they set off my smoke detectors).
Lots of toppers work very well on the P67's, but my favs for them include my Nuppin's, O-16's, 2013 Cyclone's, Manta V1/V2 hybrids and now especially the new kids on the block, the Hadaly's. But any BF atty you like built for the joose should do very well on them as well (including your LP RM2's @Silver).
A reminder for those who missed on this short run... when the next batch hits there will be so many of them available that they will remain as an in stock item on Roberts website for a very long time. Some popular color/combo's will undoubtedly run out faster than others, but with the new direction Robert is going with the P67's there should always be a good selection in stock from then on. He is also trying to add more colors/combo's (like the yellow this time). That will be determined by how few his losses are with each of the new colors. The anodized are the ones that suffer the most losses (IOW Robert has not found anyone in Maine that does a good enough job anodizing them that he doesn't suffer loosing some of them for not being up to his standards). Also keep in mind that he designed them so the Reo Grand doors fit them perfectly. He has a large stock of extra Grand doors you can buy as extra's so you can customize color combo's yourself to get what you want if it's not in stock. (I have many extra doors for my Reo P67's, Grands, Mini 2.1's and Mini 1.0's that I change on a whim or for matchy-matchy with BF RDA's)Have fun with your new toys... and lets see a lot of pictures of them set up, in use and when out and about. I especially love Reo pictures that show off the beautiful scenery in your country.
@Clouds4Days got 3 coming in so you can have 1Damit... Forgot the hot spring
Thanks bud i apreciate the offer but i got to email Rob from Reosmods yesterday and he replied saying he will throw on in my order so all sorted
Poor Rob must have gotten a fright checking his mailbox with mails from some of usView attachment 85220 to all those in SA who scored P67's from this short run.
The ReoMeister didn't think you folks had much of a chance of scoring any of them back when I called him to get the story on the short run (and the later huge run that is coming) for you folks in SA. So I assume he is surprised you got so many same as I am (there was only going to be about 20 of them).
Hope they will be game changers for you like my 4 from the first run were. The 9 of 32 Reos currently in service on my desk include those 4 P67's, with 2 of them running Hadaly's some of the time with 2015 Mech Reo Woodvil's sharing that squonk duty with them. I will eventually try one of the Kryten's on one of them for a bit as well (yes they fit just fine), but I see the Kryten's running monster super sub ohm builds on reg mods around here more than on the Reos (unless they set off my smoke detectors).
Lots of toppers work very well on the P67's, but my favs for them include my Nuppin's, O-16's, 2013 Cyclone's, Manta V1/V2 hybrids and now especially the new kids on the block, the Hadaly's. But any BF atty you like built for the joose should do very well on them as well (including your LP RM2's @Silver).
Have fun with your new toys... and lets see a lot of pictures of them set up, in use and when out and about. I especially love Reo pictures that show off the beautiful scenery in your country.
Poor Rob must have gotten a fright checking his mailbox with mails from some of us
Robert has great tolerance for folks who are not as familiar with his normal operating methods as those of us who have bought from him for years. And I know he appreciates the activity from SA. He tries to give every one the best customer service he can. Just take note though that this is a two man operation, and add on's to orders already placed/packaged for shipping do create more work for them that takes away from the machine work time.
IOW, well before sale day starts, do the research yourself to know exactly what you'll want and need on a sale day to get it all on the first order. As for spares, with the lead time and shipping costs to SA their cost is minor if you ever do need any of them to keep a Reo hitting hard day after day forever. That's cheap insurance IMO if you do have a mishap with a Reo when you are so far away. In practice the Reos are as near bullet proof as mods come. But through your errors you can drop hot springs, have contacts get to the point they need replacement, if you get over zealous pit stopping them that can cause issues, etc. I have a ton of spares for all of the Reo models I have. To me smart insurance when you have 32 of the 33 bought of them. But other than changing to brand new bottles (I have a lot of) if I ever change the dedicated liquids in any of the Reos... I still have that ton of spares. I do the same with atty's because they and their spare parts soon become unavailable with so many atty's coming out that push the older ones back into obscurity despite so many of the new ones not being better than they still are. My favorite BF atty's are all authentic's, I have a lot of them so to me it didn't cost enough extra for their spares to not keep them all viable for the rest of my vaping days. As it has turned out though I bought way too many Reos and way too many BF atty's for them that are no longer used at all.
We all orderd seperatly so everyone paid for shipping through Reosmods on their own account using usps express.
We failed to all communicate and with the rush cause we didnt know they were going up for sale, so there was no combined shipping.
Every man for himself so to speak
- Joined
- 7/10/13
- Posts
- 187
- Awards
- 19
- Age
- 52
We all orderd seperatly so everyone paid for shipping through Reosmods on their own account using usps express.
We failed to all communicate and with the rush cause we didnt know they were going up for sale, so there was no combined shipping.
Every man for himself so to speak
Cool - watching with interest to see how quickly they get here!
Just love reading through the various posts, reminds me of my excitement in the day ordering a Reo. Congratulations you all and BTW, $55 for shipping is nothing compared to the glorious satisfying vaping once you filled the bottle, a good wicked coil and taking that 1'st inhale.
The $55 was really heart soar but i like the way @Christos put it, "think of it as insurance you buying a mod that will last you a lifetime"
100% - bought mine March/April 2014 and still in daily use and not even a P67, which the latter should last even longer. I feel your excitement and enjoy it with you.
Thanks Brother... I battled to even sleep last night with all the excitment and this morning i was up early to see if i recieved any update email
Rob from Reosmods is such a great guy, i forgot too order a hotspring along with other spares, i emailed Rob and in the morning he had mailed me back saying he will add one in for me free of charge.
I recieved my tracking number this afternoon so now the endless refrehing of tracking sites comensees
What batteries do you Reo owners use ?
I will be vaping around .3 and .5 ohms on my builds and wanted to know which batteries would work well i was planning on using sammy 25R as i feel they the best in Mah vs CDR ratio
I will be vaping around .3 and .5 ohms on my builds and wanted to know which batteries would work well i was planning on using sammy 25R as i feel they the best in Mah vs CDR ratio
25R, VTC6, 30q, Chokkies....Brown LG's works just fine. I build between 0.2-0.3 ohms, no problems.
.
I use LG HG2s.Run them down to 0.25ohm builds.Perfect for me.I change batteries at 3.7V and that is just under half of an 8ml Italian bottle.
Thanks then i think i will rather use 30Q after all that LG HG2 debacle last year ive stuck to using Samsung Batts.
I have a feeling the P67s will land in SA tomorrow during the day.Then to wait for customs to clear 
Mine was in Jamaica yesterday catching some carabean sun before her maiden voyage to S.A
Similar threads
