REO - The Basics

Check for continuity between the spring and the negative of the 510 connection Annamarie
 
OK .. think the problem is under your spring .. will see when you fit the new one
 
Now remove the screw from the spring and try again from the screw hole.


Sent from iPhone
 
The screw is the point of contact, not the spring, the screw head needs to make good contact with the body of the reo.


Sent from iPhone
 
Stick a knife edge under the spring and bend it up a little to help moving the spring. Then you can unscrew the spring


Sent from iPhone
 
Hard to describe while on my phone, there's a thread on ecf describing this exact solution by Rob o Neil


Sent from iPhone
 
Ok now just clean everything including the screw hole in the reo thoroughly. Then try the test again.


Sent from iPhone
 
Nope, still no beep and if I put the RM2 and the battery on, still nothing
 
Ok wait, I took the RM2 of, and put it back on

And

ITS WORKING!!!! :party:

Thank you gys!!!!
 
I wonder if the conection between the 510 body and reo is the problem . If you have an old atty screw it into the 510 and give it a tap or two with something like a large screwdriver. Then do the test again from @Alex . Give it a good wack maby the 510 is not seating nicely
 
Vaping bliss on my little Thor :h:

What would I do without you guys :dance::*

Edit: Ow and the old battery's work, so now I've got 4 instead of 2 :D
 
Wow, @annemarievdh , glad for you the guys all tried to help and that you got it working
Hope it works well for you from now on
 
Back
Top