Replace my SVD

[Arthster]

Hi all

Ok so last night the SVD started suffering from the bad fire button issue. This is usually an indicator that its time for an upgrade

So the SVD was / is a rather powerful device if its hooked up to the right batteries. (IMR 18650 3100 mAh or 2500 mAh)

So the question is what would be a good replacement for this device. I don't mind if its either box or pipe mod.

 

[VapingDave]

Hi all

Ok so last night the SVD started suffering from the bad fire button issue. This is usually an indicator that its time for an upgrade

So the SVD was / is a rather powerful device if its hooked up to the right batteries. (IMR 18650 3100 mAh or 2500 mAh)

So the question is what would be a good replacement for this device. I don't mind if its either box or pipe mod.

Im going mechanical now after my svd, svd is but 15 watt, so ya then its only rda's going further, if you wanna stay variable voltage watt then i hear eleaf is good. For above 30w you are looking at more than a R1000 for a mod, thats why mechanical makes sense to me.

 

[VapingDave]

Im looking at the stingray x mechanical mod clone

 

[360twin]

I have just been through this very situation. I love my SVD when it works/hate it when it doesn't, and have been looking for a replacement for some time. I decided on a Smok XPro BT50 from VapeMob after doing a lot of reading - it came down to the Hana (Cana) 30W Ver.3 and this, and I just thought that the XPro was a little better.

Some of the features that made me decide:

• It's not a clone (I don't mind clones, but hate it when they use original markings)
• It goes down to 3.0 volts - most high power mods cannot go below 4V
• It's already 'proven', as although it's new, it is just a re-packaged BEC Pro
• It is much smaller than my SVD - it fits in my pocket with a tank on it
• It has a cool Bluetooth interface

I previously thought that box mods were a little strange, but after using this for a week, absolutely love it. I only run commercial tanks on it, mostly a Kanger Aerotank Mega with my ADV using a 2Ω coil at 7.5W - a little under-utilised in terms of power, but the battery lasts almost two 3.8ml tanks.

I still have my SVD (can't really sell it with a dodgy button), but now it feels large and unwieldy. It is now my back-up device - in fact my wife is using it as her CoolFire 2 has a similar button problem, until I get her a new iStick.

 

[jtgrey]

Hi all

Ok so last night the SVD started suffering from the bad fire button issue. This is usually an indicator that its time for an upgrade

So the SVD was / is a rather powerful device if its hooked up to the right batteries. (IMR 18650 3100 mAh or 2500 mAh)

So the question is what would be a good replacement for this device. I don't mind if its either box or pipe mod.

It is easy to fix the svd . Pm me if you want to know how .

 

[Arthster]

I have just been through this very situation. I love my SVD when it works/hate it when it doesn't, and have been looking for a replacement for some time. I decided on a Smok XPro BT50 from VapeMob after doing a lot of reading - it came down to the Hana (Cana) 30W Ver.3 and this, and I just thought that the XPro was a little better.

Some of the features that made me decide:

• It's not a clone (I don't mind clones, but hate it when they use original markings)
• It goes down to 3.0 volts - most high power mods cannot go below 4V
• It's already 'proven', as although it's new, it is just a re-packaged BEC Pro
• It is much smaller than my SVD - it fits in my pocket with a tank on it
• It has a cool Bluetooth interface

I previously thought that box mods were a little strange, but after using this for a week, absolutely love it. I only run commercial tanks on it, mostly a Kanger Aerotank Mega with my ADV using a 2Ω coil at 7.5W - a little under-utilised in terms of power, but the battery lasts almost two 3.8ml tanks.

I still have my SVD (can't really sell it with a dodgy button), but now it feels large and unwieldy. It is now my back-up device - in fact my wife is using it as her CoolFire 2 has a similar button problem, until I get her a new iStick.

I do like the look of the BT50... Thanks its on the short list.

 

[Arthster]

Im going mechanical now after my svd, svd is but 15 watt, so ya then its only rda's going further, if you wanna stay variable voltage watt then i hear eleaf is good. For above 30w you are looking at more than a R1000 for a mod, thats why mechanical makes sense to me.

I have my FuryS but unfortunately its a 16350, so just a tad to small for the RDA, but the 18650 version is on its way.

 

[Achmat89]

I have just been through this very situation. I love my SVD when it works/hate it when it doesn't, and have been looking for a replacement for some time. I decided on a Smok XPro BT50 from VapeMob after doing a lot of reading - it came down to the Hana (Cana) 30W Ver.3 and this, and I just thought that the XPro was a little better.

Some of the features that made me decide:

• It's not a clone (I don't mind clones, but hate it when they use original markings)
• It goes down to 3.0 volts - most high power mods cannot go below 4V
• It's already 'proven', as although it's new, it is just a re-packaged BEC Pro
• It is much smaller than my SVD - it fits in my pocket with a tank on it
• It has a cool Bluetooth interface

I previously thought that box mods were a little strange, but after using this for a week, absolutely love it. I only run commercial tanks on it, mostly a Kanger Aerotank Mega with my ADV using a 2Ω coil at 7.5W - a little under-utilised in terms of power, but the battery lasts almost two 3.8ml tanks.

I still have my SVD (can't really sell it with a dodgy button), but now it feels large and unwieldy. It is now my back-up device - in fact my wife is using it as her CoolFire 2 has a similar button problem, until I get her a new iStick.

Good choice bro, i self upgraded from an SVD to a cloupor zna and a week later i bought the BT50. Excellent device

 

[Arthster]

Thanks every one. I am really starting to consider the BT50 in a big way. even if I can rescue the SVD Im thinking of getting another mod for the collection and the BT50 is seriously starting to make its way to the top of the pile

 

[rogue zombie]

The IPV's have a rock solid reputation.
I would consider one of those.

 

[jtgrey]

The IPV's have a rock solid reputation.
I would consider one of those.

@Arthster .. like @r0gue z0mbie said . The ipv 2s is 60w and can also be upgraded to more . They are solid devices . I had the smok bec pro and it was not to bad at all . You are going to use the bluetooth maby a few times but that is it ! The other problem I had was that if a set the wattage higher then like 30w it complained about the battery if it was not fully charged . The ipv on the other hand , runs my magma at 50w from battery full to battery empty without any problems.

 

[360twin]

@Arthster Just to whet your appetite. I had a Lemo on it previously, but discovered that me and my juice don't like high wattage, so it found a new home. I love this setup

 

[Arthster]

Thanks @r0gue z0mbie @jtgrey added to the list.

 

[jtgrey]

Just to compare

Sigelei with lemo

Hana with Tailfun

Ipv with Magma

Svd with Kayfun

 

[Arthster]

@360 twin... That is a really awesome looking rig... I think this is going to turn into a close battle as to what gets to be my new relax vape.

 

[Arthster]

@jtgrey. I must admit I am liking the lower stance of the the box mods over the pipes. I love the SVD to bits. but i really like the size of the box mods.

I am definitely getting the istick for my get out quick and work vape. but my relax vape I want to make something special. I have the MVP for tanking but I need something with more grunt for dripping which will basically be what I base my decision on, and at the the moment the IPV looks like it may be the winner.

 

[jtgrey]

Lol sorry forgot about the istick

 

[Arthster]

Lol Thanks... Ok so who in SA does the IPV's?

 

[360twin]

I know @JakesSA uses an IPV and has only good things to say about it. The reasons I discounted it was it has a minimum output of 4V (not a huge issue really), and no-one had stock (the main reason). It is a little taller and skinnier than the XPro, but not hugely so. If my XPro still works as well as his IPV after the use he has put it through, I will be very happy

 

[jtgrey]

@Sir Vape had in stock .

 

[Ollie]

Hey @Arthster

Vape King has the IPV 2

http://vapeking.co.za/pioneer4you-ipv-v2.0-50w-mod-black.html

 

[360twin]

The only place currently I know is Vape King.

Edit: Geez, Oliver - you're too quick!

 

[Arthster]

Had a look Vape King has them to and they just up the road from me... this is going to be a long Christmas I think

 

[Ollie]

Had a look Vape King has them to and they just up the road from me... this is going to be a long Christmas I think

Im in the same boat as you @Arthster. I have an internal battle going on in my head as to weather i should spend my money on a few mods (The IPV 2 being one of them) and some drippers, or just buy a Reo!

Problem is I like gadgets and all things fiddely, and I have tried a few Reo's. I know for a fact that as soon as I buy the Reo, My gadget buying will come to an end. haha... am I ready for that?

 

[Arthster]

Im in the same boat as you @Arthster. I have an internal battle going on in my head as to weather i should spend my money on a few mods (The IPV 2 being one of them) and some drippers, or just buy a Reo!

Problem is I like gadgets and all things fiddely, and I have tried a few Reo's. I know for a fact that as soon as I buy the Reo, My gadget buying will come to an end. haha... am I ready for that?

I am in exactly that same boat... But I am definitely getting the Reo early next year. I am pretty sure my gadgeting wont end there. I already have the Mech Mod on order. the Istick is on the wish list and now the IPV to. problem is when I am done buying i wont have anything to vape in the kit...