Nice builds broNah 1 or 2 here and there.
Sent from my iPhone using Tapatalk
Show us your builds - Drippers (RDAs)
- Thread starter Hein510
- Start date
Mkay let me know when u keen when u departing again?
Suppose to start work on the 1 September and its a perm post so i won't be back again.
Sent from my iPhone using Tapatalk
Ok so here is a tri parallel coil brining subohm of note.
Sent from my iPhone using Tapatalk
I would be to bang to vape that.....
Ok so here is a tri parallel coil brining subohm of note.
Sent from my iPhone using Tapatalk
340W 84A I don't know of a battery I would attempt that on.
eish
Ok so here is a tri parallel coil brining subohm of note.
Sent from my iPhone using Tapatalk
Some 0.6ohm micro rda action....its a brute
Dripper on mvp for scale
Dripper on mvp for scale
Was proud of this one. 12/13 wrap dual coils on my Tobh. Takes a while to warm up, but vapes real nice! Still testing out wick thickness / density. My last one burnt clear in half after a week or so!
Boredom new plumeveil build
2 mm id
26g
10-11 wraps pc
.6 ohm
Overall not bad takes its own time to heat up
2 mm id
26g
10-11 wraps pc
.6 ohm
Overall not bad takes its own time to heat up
Sooooo.....
Hurt my back again yesterday while at work and decided not to go in today. I could hardly get up this morning.
Anyway, later on, after taking half an hour to get from my bedroom to my pc..... I decided to build a new coil for my Plume Veil and this is what I came up with:
Quad coil 26 gauge kanthal over 2.5mm id drill bit. Measures in @ .24 ohms. 9 Wraps per coil.
Here she is all wicked, saturated with SkyBlue RY4 Double and ready to go! Still using my faithful Bamboo Yarn.
And she chucks like a steam engine!!
Heavenly flavour and decent clouds
I found my sweetspot and it's definitely with the Plume Veil and a 26g quad coil
Hurt my back again yesterday while at work and decided not to go in today. I could hardly get up this morning.
Anyway, later on, after taking half an hour to get from my bedroom to my pc..... I decided to build a new coil for my Plume Veil and this is what I came up with:
Quad coil 26 gauge kanthal over 2.5mm id drill bit. Measures in @ .24 ohms. 9 Wraps per coil.
Here she is all wicked, saturated with SkyBlue RY4 Double and ready to go! Still using my faithful Bamboo Yarn.
And she chucks like a steam engine!!
Heavenly flavour and decent clouds
I found my sweetspot and it's definitely with the Plume Veil and a 26g quad coil
Indeed! These things hit harder than freight trains@Nimbus_Cloud Is that a Copper Penny? I love my Penny I got from you guys.
latest build i have in the plume veil, comes in at 0.18 ohms, takes a while to heat up but chucks the vapour
0.18Ωlatest build i have in the plume veil, comes in at 0.18 ohms, takes a while to heat up but chucks the vapour
View attachment 11458
one day when im beeg i will try that
latest build i have in the plume veil, comes in at 0.18 ohms, takes a while to heat up but chucks the vapour
View attachment 11458
Beautiful coiling there man! What wire did you twist there?
super awesome coil ET!!!! well done!!!
well done!!!
Ok, Heres a doozy... My builds were in the wrong place, so I'm going to stick em here.
righto!
iGO-W (Dual triple segmented coil)
Wire: 24AWG Kanthal
Wraps: 9 per coil
ID: 3.2mm
OHMs: 0.42
Takes a while to heat up, really smooth vapor.
iGO-W (Dual coil centre post build)
Wire: 24AWG Kanthal
Wraps: 7 per coil
ID: 3mm
OHMS: 0.28
Hits pretty hard, loads of vapor!
Stillare (Dual coil build)
Wire: 24AWG Kanthal
Wraps: 6 per coil
ID: 3.5mm
OHMs: 0.50
Didn't put out enough for my liking.
Stillare (Dual modified microcoil)
Wire: Twisted 28AWG
Wraps: 4 per coil, spaced out
ID: 1.5mm
OHMs: 0.27
So far I'm liking this one
righto!
iGO-W (Dual triple segmented coil)
Wire: 24AWG Kanthal
Wraps: 9 per coil
ID: 3.2mm
OHMs: 0.42
Takes a while to heat up, really smooth vapor.
iGO-W (Dual coil centre post build)
Wire: 24AWG Kanthal
Wraps: 7 per coil
ID: 3mm
OHMS: 0.28
Hits pretty hard, loads of vapor!
Stillare (Dual coil build)
Wire: 24AWG Kanthal
Wraps: 6 per coil
ID: 3.5mm
OHMs: 0.50
Didn't put out enough for my liking.
Stillare (Dual modified microcoil)
Wire: Twisted 28AWG
Wraps: 4 per coil, spaced out
ID: 1.5mm
OHMs: 0.27
So far I'm liking this one
Ok, 1 more
iGO-W (messy super sub ohm)
Wire: 24AWG Kanthal
Wraps 3 per coil, spaced far apart
ID: 1.5mm
OHMs: 0.18 ( )
I'm finding that these spaced out coils, are chucking way more vapor, than tight macro or micro coils, also finding that the flavour is a little better, and them seem to wick better, because the cotton has a chance to breath. Running one on my kayfun too (forgot to take pics, and its all assembled and filled now)
iGO-W (messy super sub ohm)
Wire: 24AWG Kanthal
Wraps 3 per coil, spaced far apart
ID: 1.5mm
OHMs: 0.18 (
)I'm finding that these spaced out coils, are chucking way more vapor, than tight macro or micro coils, also finding that the flavour is a little better, and them seem to wick better, because the cotton has a chance to breath. Running one on my kayfun too (forgot to take pics, and its all assembled and filled now)
Last edited:
Wow @n0ugh7_zw - those are some spectacular coils!
So adventurous (on the shapes and sizes as well as the low ohms)
Well done
Let us know what you think is working best for you
So adventurous (on the shapes and sizes as well as the low ohms)
Well done
Let us know what you think is working best for you
Similar threads
