Very neat coiling there. With that slow heat up and slow cool down with the thick 26g wire and the small ID, will the cotton wick not be prone to burn out quickly?
Show Us Your Working Wick And Coil Setup
- Thread starter RIEFY
- Start date
- Status
probably but I rewick the Kayfun daily. been vaping it for the last hour and no dry vapes or burnt tastes.
Love the crackle this coil makes! sounds like a rattle snake inside the Kayfun!!
also got some Liqua and TopQ mix in here and the VP is awesome!! usually I don't get a lot of vapor from Liqua or TopQ!
for the kayfun/russian guys.
From tomorrow its back to reoville so here is one last build.
10 wraps 28g around mini screw driver
The glow
The cotton wick
Trimmed and seated
The ohms
hope this helps for any one with leaking or gurgling issues
Sent from my GT-I9500 using Tapatalk
From tomorrow its back to reoville so here is one last build.
10 wraps 28g around mini screw driver
The glow
The cotton wick
Trimmed and seated
The ohms
hope this helps for any one with leaking or gurgling issues
Sent from my GT-I9500 using Tapatalk
awesome man! nice build!
cant wait to check out that Reo!!!
Sent from my GT-S5300 using Tapatalk 2
cant wait to check out that Reo!!!
Sent from my GT-S5300 using Tapatalk 2
No doubt you wanna build something like it!
I'm still enjoying this double twisted 26g coil! Takes a while to heat up and then BAM! Like that Alfa thing I said, you know its ready when it backfires! POP and then flavour!
I meant the mod, not the coil! Probably in wood.
Hahaha! Yeah a woody Reo would be awesome!!!
awesome build @Cape vaping supplies
Quick dry burn and re-wick on the RM2 tonight.
28g, 7/8 wraps @ 0.93 ohm (a week ago), after some adjusting and wear & tear @ 1.01 ohm (currently)
Sent from my D5503 using Tapatalk
28g, 7/8 wraps @ 0.93 ohm (a week ago), after some adjusting and wear & tear @ 1.01 ohm (currently)
Sent from my D5503 using Tapatalk
Lovely setup @Vapey McJuicy
@Hein510: Ok wait, let me get this straight... did you just build that mod yourself? (as your title suggests)
@Hein510: Ok wait, let me get this straight... did you just build that mod yourself? (as your title suggests)
Hahahaha!!! I wish! but lets see in the future, busy with the Project Prime at the moment and have some work days coming so hopefully next week I can sit and work on the Prime and finish the fire button.
Much appreciated @Reinvanhardt !
PS Hein seems to be able to build anything, but me pretty sure a Mr. Google built those, lol
Sent from my D5503 using Tapatalk
Much appreciated @Reinvanhardt !
PS Hein seems to be able to build anything, but me pretty sure a Mr. Google built those, lol
Lol I thought that was a bit quick! With these guys you never know! The wooden Reo does seem the one to build if you were so inclined. Good luck with your DIY endeavors @Hein510
Herewith my first true sub-ohm build. 6/7 wraps of 26g kanthal around a 1.7mm id on a Trident.
Vaping at 22w atm hahaha! Life is good friends!
Using kayfun for sweet juices for now, so here a rather boring sweet juice coil.
That leg on the left does not touch. 1.5 Ohm. Coil a bit closer to the chimney to increase temp. Prefer a warmer vape, even at higher ohms.
30g kanthal around screwdriver.
That leg on the left does not touch. 1.5 Ohm. Coil a bit closer to the chimney to increase temp. Prefer a warmer vape, even at higher ohms.
30g kanthal around screwdriver.
- Status
Similar threads
