The Little Beast

That can't be too bad though, could it? >:)

That would depend if the 'excited bits' looks like a 650mAh battery or the juice bottle. The battery might just get you an 'Ag, shame !!' response.
Ah, that reminds me - gotta refill my bottle of apple juice for later today ;)

baby-bottle-with-fresh-apple-juice.jpg
 
@vaalboy
you can stealth vape with anything short of a dripper, just takes a slightly different breathing style. i call dibs on inventing it barring somoeone else of course having done it with proof before now. it's a variation on the holding your breath thing. works darn well with my reo that likes to made big puffs.
1) don't take a full inhale, say half max lung capacity
2) now fill up your lungs to max with normal air
3) wait a second or two and exhale, watch the small trickly of vape come out
:)

Thanks for your advice, however the biggest problem I have with stealth vaping the Reo is the residual vape that escapes from the reomiser after a pull. What I have been doing is stop firing but continue the drag to suck up the last bit a vapour which works ok. I'm looking for something with no lights that I can completely conceal in my hand.
 
Thanks for your advice, however the biggest problem I have with stealth vaping the Reo is the residual vape that escapes from the reomiser after a pull. What I have been doing is stop firing but continue the drag to suck up the last bit a vapour which works ok. I'm looking for something with no lights that I can completely conceal in my hand.
Leave the button and suck for a second or so longer while not pressing?
 
Thanks for your advice, however the biggest problem I have with stealth vaping the Reo is the residual vape that escapes from the reomiser after a pull. What I have been doing is stop firing but continue the drag to suck up the last bit a vapour which works ok. I'm looking for something with no lights that I can completely conceal in my hand.

most definately NOT said by any woman ever in the history of time :p
 
Pictures of the atty - will explain later if need be. I always thought pictures speak clearer than words.

imagejpg1.jpg

All the parts disassembled

preview_image_1_5224986.jpg

The ceramic cup with coil positioned on air tube. (Heating coil pinned in place with needles) Later a bit more on this.

preview_image_1_5077590.jpg

The main tank bottom. Note the inner hole has a thread where the coil assembly screws into from the top of the tank

preview_image_1_2524721.jpg

Top of the tank with coil assembly screwed in place

preview_image_1_5568975.jpg

Cotton or silica rope wick threaded through insulator tube (Fits over the coil assembly) Parker pen refill...


preview_image_1_2296987.jpg

Wick trimmed and ready to install

preview_image_1_881045.jpg

Firing the coil to check connections.

preview_image_1_5427925.jpg

Wick in place over coil

preview_image_1_3289494.jpg

Simple filling. unscrew the cap off, fill with juice, replace the cap. Also very easy to replace just the wick.

preview_image_1_9513817.jpg

Ready to go!

preview_image_1_1405042.jpg

Leak proof. Even shaken or stirred..

:)
 
Last edited:
One more thing I'd like to add, I found the adjustable airflow "commercial" models very noisy - doesn't matter on which setting you have it. The smallest & obviously hardest draw is the quietest usually. The airflow in this atty is quite "airy" by using 3 x 1mm holes drilled at 120 degrees apart. It is really very very quiet on the draw. It seems that the smaller but more holes you use, the less noisy it becomes.
 
@Boer With the coil that close to your mouth, do you not get juice on your tongue? You mentioned strong TH, but the flavour must be really strong too! I understand the comparison to Gauloises now :p
 
@Boer With the coil that close to your mouth, do you not get juice on your tongue? You mentioned strong TH, but the flavour must be really strong too! I understand the comparison to Gauloises now :p

Not a single splatter 360twin. The wick actually shields all splatter to your mouth. I was skeptical at first and designed a mesh screen in the cap but it proved to be of no purpose and added to the draw resistance. If the wick is removed or too thin it's another story altogether....
 
Amazing what you created @Boer
Thanks for the photos
Are you coming to the JHB Vape Meet?
 
Back
Top