The Origen Little 16 BF Thread (OL16)

Also don't oversquonk. If there is to much juice in the chamber you won't get good flavor

Sent from my SM-N920C using Tapatalk
 
My first build - 24kanthal, 2/2.5 mm id = .2 ohm, CBv2, two big air holes, and the best flavour out of my DIY Jack Blue ever - been squonking this since last night, two battery charges, and still in love!:elefant:
image.jpeg
 
OK I'm starting to get the OL16... still can't make up my mind whether I prefer the standard cap or cloud cap... but with a dual coil at 0.37Ω at 40 watts I'm starting to get the flavour I had hoped for.

I think it's time to get @hands to make a decent drip tip for the cloud cap!

FrdayHand1.jpg FrdayHand2.jpg
 
@SAVapeGear Don't know why I just didn't read your tips sooner :-(

Placing the coils as close as possible to the posts gives perfect flavour and vapour. Thanks for the tip. I was struggling the past week to try find the sweet spot...
 
Adjusted my coils last night as well. Flavor improvement is very good.
 
Flava said:
Adjusted my coils last night as well. Flavor improvement is very good.
Click to expand...

I do everything @SAVapeGear suggested, except I keep my coils aligned with the airholes. I am not loving the atty's.
I do need to try it slightly higher than the airholes, like I build my petri. I have a suspicion it will be great.

P.S. It's amazing what 1-2mm does in terms of flavour in relation to placement of the coil...
 
Lushen said:
I do everything @SAVapeGear suggested, except I keep my coils aligned with the airholes. I am not loving the atty's.
I do need to try it slightly higher than the airholes, like I build my petri. I have a suspicion it will be great.

P.S. It's amazing what 1-2mm does in terms of flavour in relation to placement of the coil...
Click to expand...
My coils is as low as they can be with the rod inserted.So I push them as low as they can go with the ID pole touching the sides of the base.2.5MM ID and as close to the posts as possible.Loving this Atty.
 
SAVapeGear said:
My coils is as low as they can be with the rod inserted.So I push them as low as they can go with the ID pole touching the sides of the base.2.5MM ID and as close to the posts as possible.Loving this Atty.
Click to expand...
But this is the only build I have tried and done.

@Christos also like putting one coil a little higher than the other one and says that it changes the flavor a little and bring out different notes.
 
Lushen said:
I do everything @SAVapeGear suggested, except I keep my coils aligned with the airholes. I am not loving the atty's.
I do need to try it slightly higher than the airholes, like I build my petri. I have a suspicion it will be great.

P.S. It's amazing what 1-2mm does in terms of flavour in relation to placement of the coil...
Click to expand...
@Lushen I do the same build as @SAVapeGear explained but I align the coils slightly higher than the airholes. i.e. 50% of the coil is above the post height. I battled finding flavor muted until I did the coils like that, slightly higher, 100% improvement on flavor.
 
Deckie said:
@Lushen I do the same build as @SAVapeGear explained but I align the coils slightly higher than the airholes. i.e. 50% of the coil is above the post height. I battled finding flavor muted until I did the coils like that, slightly higher, 100% improvement on flavor.
Click to expand...
Please share some pics guys. Thanks.

Would like to try it as well

Sent from my SM-N920C using Tapatalk
 
Thanks. I will give this a go on my next build.

Sent from my SM-N920C using Tapatalk
 
 
Last edited:
Here is some pics of my latest build.Same spec as always,just raised as recommended.

Flavor seems better with a little more airflow.

Must say,you guys are cutting it close to the top cap. :D:whew:
 

Attachments

  • 20161001_172728.jpg
    20161001_172728.jpg
    150.3 KB · Views: 44
  • 20161001_172715.jpg
    20161001_172715.jpg
    165.1 KB · Views: 41
  • 20161001_172103.jpg
    20161001_172103.jpg
    156.3 KB · Views: 41
  • 20161001_172024.jpg
    20161001_172024.jpg
    188.5 KB · Views: 39
  • 20161001_172017.jpg
    20161001_172017.jpg
    202.6 KB · Views: 45
  • 20161001_171949.jpg
    20161001_171949.jpg
    202.6 KB · Views: 45
  • 20161001_171837.jpg
    20161001_171837.jpg
    133 KB · Views: 43
At the risk of sounding perverted..... thanks @Caramia ..... after looking at your soaked fluffy coils, I decided to give the OL another go. Also some advice from @SAVapeGear. Thanks guys... I've removed it from the classifieds and can say that the flavour is good. A little warm but good.
 
Lee said:
At the risk of sounding perverted..... thanks @Caramia ..... after looking at your soaked fluffy coils, I decided to give the OL another go. Also some advice from @SAVapeGear. Thanks guys... I've removed it from the classifieds and can say that the flavour is good. A little warm but good.
Click to expand...
Glad I could be of some assistance, hope it works, as well as it works for me, for you from here on:)
 
Lee said:
At the risk of sounding perverted..... thanks @Caramia ..... after looking at your soaked fluffy coils, I decided to give the OL another go. Also some advice from @SAVapeGear. Thanks guys... I've removed it from the classifieds and can say that the flavour is good. A little warm but good.
Click to expand...

Glad you are winning with it @Lee... I'm still not winning... but I am persevering because I have a custom cloud cap drip tip coming and I really want to win with this atty... will try again with a single coil when my cloud cap returns from Kokstad!
 
You must log in or register to reply here.

Similar threads

Stranger
The quick and easy build thread
Replies
2
Views
696
DarthBranMuffin
DarthBranMuffin
SessionDrummer
Sterling Cloud Flavors Reviewed by SessionDrummer
Replies
0
Views
162
SessionDrummer
SessionDrummer
Rob Fisher
The One
Replies
4
Views
446
Amir
Amir
Aspire-Marketing
Aspire – Fluffi Mini
Replies
0
Views
94
Aspire-Marketing
Aspire-Marketing
Aspire-Marketing
Aspire – Pixo
Replies
0
Views
321
Aspire-Marketing
Aspire-Marketing
Back
Top