Will try that now and report back , tap hot or kettle hot
The Reomiser 2
- Thread starter devdev
- Start date
tap hot... else you gona burn your fingers 
I have my bike gloves but they worth more then a reo and reomizer so a big no no
Jislaaaik im so frustrated , my coil broke and I can't get this damn thing open .
All my back ups at the office
All my back ups at the office
did the hot water not work?
Its still being run under the tap
....MUST.....RESIST>>>>....
Lol .... at least that made me laugh
Shabbar, have you got a vice or a mole grip?
You can quadruple a dish washing cloth, and then wrap that around the Reomiser hood. Then place in a vice and you should be able to get enough grip to take it off.
You can quadruple a dish washing cloth, and then wrap that around the Reomiser hood. Then place in a vice and you should be able to get enough grip to take it off.
Hot water ain't doing shit
Ffs
Ffs
No vice or anything . Only pliers and its slipping when I grip with a cloth
dont u have some yellow dish gloves? or something similar?
just an update - i trimmed the back legs off - no drop in resistance - so it seems whatever comes out the back, if they dont touch each other it doesnt matter
yep finally got it open.
Used some very thin 2way tape that gave the reomizer and top cap some grip
Thanks for the suggestions
Too frustrated to do a build , will see tomorrow morning
Great coiling. I also did that trick on the legs, works great. No, you will never get it silver again. I just blow off the gunk as I dry burn, some wash under under a stream of water.Hey guys
When u dry burn ur old coil, does it turn silver again? Mine stays black. And I think it mutes my flavour. All that kakka that packs onto the coil.
So in the mean time I did a quick rebuild.
26g kanthal
1.5mm ID
10 wraps
1.02 Ohms
I tightened the coil on the drill like in the video and I must say its really neat. Good tip. Thanks.
Sent from my GT-I9500 using Tapatalk
Time to get my vape on 
Great coiling. You seem to have it down pat. And there was a time you thought you could not manage it. Well done! Is the vape to your satisfaction?
a whole year of video tutorials and learning from the forums seem to have paid off , and i was thrown into the deep end and forced to build my own coils , so i had to learn eventually .
its the best vape ever , i took a few puffs from my evods and you cant even compare the two .
they have been retired for and currently saving for a Reo mini.
sup guys - i seem to have hit a slump with my micro coils and cotton.
i think the main culpret here is the cotton, i keep getting a burnt tatse, and as soon as i think i might get near a dry hit i squonk.
now i dont know if its maybe due to my noobness with the reo, but it might be that my wick is sometimes too wet, and i also dont get that vapour.
i have now reverted back to a 3 strand silica wick and 28G 5 wrap ugly coil - 1.02 Ohm.
is there any advise? or maybe a nice micro coil build can do with 3 starnds silica?
i think the main culpret here is the cotton, i keep getting a burnt tatse, and as soon as i think i might get near a dry hit i squonk.
now i dont know if its maybe due to my noobness with the reo, but it might be that my wick is sometimes too wet, and i also dont get that vapour.
i have now reverted back to a 3 strand silica wick and 28G 5 wrap ugly coil - 1.02 Ohm.
is there any advise? or maybe a nice micro coil build can do with 3 starnds silica?
You could pull doubled 1 mm silica through like below with dental floss. I also sometimes use 1 mm hollow Ekowool and screw it through the micro coil. These are 1.5 mm ID, but you get the idea. Otherwise 4 strands of 1 mm hollow Ekowool ugly coil works as well.
Similar threads
