would 1 piece of ecowool be too little wicking wise?
if so then how does the 4 strands ugly coil perform vs 1 strand 1.5mm micro coil?
if so then how does the 4 strands ugly coil perform vs 1 strand 1.5mm micro coil?
The Reomiser 2
- Thread starter devdev
- Start date
You mean one strand Ekowool in a micro coil vs 4 strands Ekowool in an ugly coil? Have never compared directly. Presume the 4 strands will wick more effectively.
not jsut wicking wise - general vape wise? VTF?
Now you are testing my memory. Have been using ceramic wicking lately. Think the TH on the 4 strand is less potent, flavour and vapour much of the same. Draw on the 4 strands somewhat tighter.
ok cool - i vape on this ugly coil for now, and once i get my hands on some eco wool i'll dry a 1.5ID, 10 Wrap paracoil - can my REO handle about 0.85Ohm whitout the subohm? as im not sure when my package from roesmods will arrive....
I'm very happy with my organic cotton wicks... and one thing that @vaalboy taught me with the micro coil for the REO is LESS is MORE. My wicks were too long and too thick when I started and that may be your issue. Make it a whole heap shorter and not too tight in the coil.
Also make sure the coil is close to the edge and next to the juice hole... also make sure your air hole is right by the coil.
The higher the coil the higher the TH... I like a smooth vape so my coil is right down almost on the deck.
Also make sure the coil is close to the edge and next to the juice hole... also make sure your air hole is right by the coil.
The higher the coil the higher the TH... I like a smooth vape so my coil is right down almost on the deck.
yea, my cotton fits snugly in the coil, but not too tight and also not too loose.
the coil is on the outer edge and ends just above the juice hole...
but with the silica now im getting that sweet taste again from my pineapple i made... i did not get it with cotton....
Yes, easily - you can go down to 0.65 ohms safely.
As long as it works for you that's kewl... I just could never get to like Silica wick... the ReadyXwick is great but I only had two small pieces and I was still playing with coils when I tried it so I'm waiting to get hold of it again now that I think I know what I'm doing.
I am having good luck with the current coil I have:
Parallel 28g, 2mm ID, 6 or 7 wraps I think, and 2mm ekowool pulled through like the pic above, except using a small piece of folded Kanthal instead of dental floss.
.8ohms
Still not convinced about the benefit of ekowool regards taste, but easier to dry burn when on the road and changing flavours. The cotton gives me more dense
flavour.
Parallel 28g, 2mm ID, 6 or 7 wraps I think, and 2mm ekowool pulled through like the pic above, except using a small piece of folded Kanthal instead of dental floss.
.8ohms
Still not convinced about the benefit of ekowool regards taste, but easier to dry burn when on the road and changing flavours. The cotton gives me more dense
flavour.
ok i must admit - this ugly coil has settled in now, and im getting the best vape i ever had?
it looks like siht, but man o man, IMO it out performs even the pretiest coils i have built....
it looks like siht, but man o man, IMO it out performs even the pretiest coils i have built....
She ain't gona win any beauty contests but I cal her the scarecrow build
5 wraps of 28G over 3 srands of 2mm silica...1.02 Ohms
Sent from my GT-I9500 using Tapatalk
5 wraps of 28G over 3 srands of 2mm silica...1.02 Ohms
Sent from my GT-I9500 using Tapatalk
Yip, will have to take back that medal, I am afraidShe ain't gona win any beauty contests but I cal her the scarecrow build
5 wraps of 28G over 3 srands of 2mm silica...1.02 Ohms
Sent from my GT-I9500 using Tapatalk
.
Yip, will have to take back that medal, I am afraid
Just joking, of course.
Lol. Go check my new vid and gimme a youtube medal 
Ok. So I did a micro coil cause I like pretty coils. Haha
26g
2mm Id
8 wraps
1.02 Ohms
2 strands of 2mm silica
Prerty on par with my ugly coil performance wise
I did cut the wick on the borders of the base, so its shorter.
Sent from my GT-I9500 using Tapatalk
26g
2mm Id
8 wraps
1.02 Ohms
2 strands of 2mm silica
Prerty on par with my ugly coil performance wise
I did cut the wick on the borders of the base, so its shorter.
Sent from my GT-I9500 using Tapatalk
Last edited:
Great coiling. I also started using kanthal to pull the silicone through, but found it tended to cut the silicone, so moved to dental floss,which is amazingly tough. Now, when you feel that wick has done its job, you can just pull it, dry burn and pull another one through - the coil should be good for at least a month, you will probably get coil building withdrawal systems before that.Ok. So I did a micro coil cause I like pretty coils. Haha
26g
2mm Id
8 wraps
1.02 Ohms
2 strands of 2mm silica
Prerty on par with my ugly coil performance wise
I did cut the wick on the borders of the base, so its shorter.
Sent from my GT-I9500 using Tapatalk
yea i love me some coil building - luckily i still have a IGO w4 to put coils into lol
How did you fit 2 2mm strands in there
I can't get 1 double folded 1.5mm into a 2mm id coil without damaging the coil
I can't get 1 double folded 1.5mm into a 2mm id coil without damaging the coil
I used 32g kanthal to pull it through. But I wrapped my coil very tight. Then torched it with tweezers the heat it up. Compress with tweezers heat up. Compress. Heat up compres. I repeated that alot to make a solid coil. And boom presto
Been using all day. Just decided to post a pic for myself for future reference after a quick wick change and dry/water burn.
Parra, 26awg, 2mm id, .4ohm monster coil
This baby gets hot fast.
Sent from my awesome Reo-mini.
Reosmods have a new bottom feed Reomiser now in stock! The Reomiser 4.0
http://www.reosmods.com/index.php?p...category_id=32&option=com_virtuemart&Itemid=3
http://www.reosmods.com/index.php?p...category_id=32&option=com_virtuemart&Itemid=3
Similar threads
