The Reomiser 2

[TylerD]

So I've been running the Atomic on the mini.

1. 1st was Dual coils 3 wrapps 0.9 ribbon on 2 x 2mm ekowool. Didn't measure, but around 0.3 / 4
I wasn't very impressed. Took too long to heat up and drained the battery very fast.
2. 2nd I ripped one of the coils out, keeping the other coil. Thus 0.6 / 7.
Better, but not the flavor I get from the RM2.

Are there something I'm missing?
I loved the Atomic on my panzer, but for some reason on the Reo, it's not making my day.

How does your Atomic compare to the RM2?

 

[Alex]

So I've been running the Atomic on the mini.

1. 1st was Dual coils 3 wrapps 0.9 ribbon on 2 x 2mm ekowool. Didn't measure, but around 0.3 / 4
I wasn't very impressed. Took too long to heat up and drained the battery very fast.
2. 2nd I ripped one of the coils out, keeping the other coil. Thus 0.6 / 7.
Better, but not the flavor I get from the RM2.

Are there something I'm missing?
I loved the Atomic on my panzer, but for some reason on the Reo, it's not making my day.

How does your Atomic compare to the RM2?

With standard dual coils, 1.4mm ID, very short legs, @.4ohms using the dual 1.5mm air holes - absolutely brilliant flavour for me, more intense than rm2 with same juice.

 

[TylerD]

With standard dual coils, 1.4mm ID, very short legs, @.4ohms using the dual 1.5mm air holes - absolutely brilliant flavour for me, more intense than rm2 with same juice.

I will try that this afternoon. Thanks Alex.

 

[Andre]

@Andre how many wraps per coil with 28g please? I think it's time I tried a dual coil.

Sorry for the late reply, was otherwise occupied.
Let us say you want to go for around 0.8 ohms. On a 1.5 mm mandrel that would be around 10 wraps per coil.

 

[Andre]

Rob, until Ande answers, two 0.9 ohm coils. I build a 0.9 with 28g kanthal around 1.5 mm with 6 wraps
I know Andre uses 27g, so guess he uses 7 wraps if the same ID

So for dual coils it means 12 wraps per coil.

 

[Andre]

@Andre do you lung hit 18mg

Sent from my GT-I9500 using Tapatalk HD

Very, very rarely.....about once a month!

 

[Andre]

@Andre if you could please post pics id love to see that setup

Check it out over here: http://www.ecigssa.co.za/threads/ceramic-wick.2073/page-2#post-89800.
The one coil got a knock along the way. Still using those same coils and wick right now.

 

[Morne]

Check it out over here: http://www.ecigssa.co.za/threads/ceramic-wick.2073/page-2#post-89800.
The one coil got a knock along the way. Still using those same coils and wick right now.

WOW... Awesome thanks @Andre

 

[RIEFY]

Finally a dual coil setup hitting like a mule. excellent flavor vapor and throat hit. hopefully I wont mess with this coil for a while. 2mm id 28g 5/6 wrap ugly coil around .5ohms. The dark side gets better tge darker it gets lol

Sent from my GT-I9500 using Tapatalk HD

 

[Andre]

Finally a dual coil setup hitting like a mule. excellent flavor vapor and throat hit. hopefully I wont mess with this coil for a while. 2mm id 28g 5/6 wrap ugly coil around .5ohms. The dark side gets better tge darker it gets lol

Sent from my GT-I9500 using Tapatalk HD

Now we are talking! Always been my gut feel that dual coils are only really effective if at around 0.6 ohms. And you must have proper AFC with it. Not much hope that you will not mess with that one shortly.

 

[Morne]

@Andre what's the lowest Ohm I can't safely run in a Mini (18500)

 

[Silver]

Finally a dual coil setup hitting like a mule. excellent flavor vapor and throat hit. hopefully I wont mess with this coil for a while. 2mm id 28g 5/6 wrap ugly coil around .5ohms. The dark side gets better tge darker it gets lol

Sent from my GT-I9500 using Tapatalk HD

Super coil and great photos yet again!
Lovely!

 

[Andre]

@Andre what's the lowest Ohm I can't safely run in a Mini (18500)

Presume you are talking out the Efest 18500 1000 mAh batts. If so, from all the info I have seen, you could probably go safely down to 0.5 ohms. Personally, I would feel more comfortable at 0.55 to 0.6 ohms.

 

[RIEFY]

Presume you are talking out the Efest 18500 1000 mAh batts. If so, from all the info I have seen, you could probably go safely down to 0.5 ohms. Personally, I would feel more comfortable at 0.55 to 0.6 ohms.

I will report back as I just started tonight at .52 ohms and see how these purple efests hold up

Sent from my GT-I9500 using Tapatalk HD

 

[Yiannaki]

Presume you are talking out the Efest 18500 1000 mAh batts. If so, from all the info I have seen, you could probably go safely down to 0.5 ohms. Personally, I would feel more comfortable at 0.55 to 0.6 ohms.

Which reminds me, I better run out and get a few tomorrow!

 

[Morne]

I will report back as I just started tonight at .52 ohms and see how these purple efests hold up

Sent from my GT-I9500 using Tapatalk HD

@Cape vaping supplies Thanks, keep up posted

 

[Gazzacpt]

Now we are talking! Always been my gut feel that dual coils are only really effective if at around 0.6 ohms. And you must have proper AFC with it. Not much hope that you will not mess with that one shortly.

I noticed this to. Dual coils need to be low resistance to shine. I'm really enjoying single coils at the moment 0.6 - 0.9 ohms.

 

[Yiannaki]

So I decided to experiment this evening as I have quite found a good build for this ribbon wire.

0.8 X 0.1 mm ribbon, 2mm ID, 5 wraps. 0.76 ohms.

 

[Alex]

So I decided to experiment this evening as I have quite found a good build for this ribbon wire.

0.8 X 0.1 mm ribbon, 2mm ID, 5 wraps. 0.76 ohms.

That coil looks awesome.

 

[Yiannaki]

That coil looks awesome.

Thanks @Alex

Busy wicking it now. Will let you know how it vapes

I'm missing the rayon like mad. Cotton just isn't the same anymore!

 

[RIEFY]

So I decided to experiment this evening as I have quite found a good build for this ribbon wire.

0.8 X 0.1 mm ribbon, 2mm ID, 5 wraps. 0.76 ohms.

awesome bro ribbon works well. if you want to get your coils looking neater with the same space between them leave it on mandrel take a pliers and grip the 2 ends space coils and pull tight with plieŕs. install with mandrel in place then remove and thread your wick through

Sent from my GT-I9500 using Tapatalk HD

 

[Alex]

Thanks @Alex

Busy wicking it now. Will let you know how it vapes

I'm missing the rayon like mad. Cotton just isn't the same anymore!

You forgot to take the stuff I cut off for you.

 

[Yiannaki]

awesome bro ribbon works well. if you want to get your coils looking neater with the same space between them leave it on mandrel take a pliers and grip the 2 ends space coils and pull tight with plieŕs. install with mandrel in place then remove and thread your wick through

Sent from my GT-I9500 using Tapatalk HD

Thanks for the tip bro!

Will most definitely do that on the next one

You forgot to take the stuff I cut off for you.

Lol I know I'm such a chop!

By the time I clicked I was already halfway home

At least I have reo bottles to bribe u with now

 

[Alex]

Thanks for the tip bro!

Will most definitely do that on the next one

Lol I know I'm such a chop!

By the time I clicked I was already halfway home

At least I have reo bottles to bribe u with now

You have a Reo for me I'll be there in 10

 

[Yiannaki]

You have a Reo for me I'll be there in 10

Lol you have 2 already

Speaking of reos, there might be a surprise coming soon [HASHTAG]#excitement[/HASHTAG]