The Reomiser 2

I almost forgot.

So the coil I posted... flavour is good :D condensed milk is going down nicely.

Vapour production is average but daaaaaaaaaaaaaam the throat hit is quite hectic considering the coil is sitting quite low.

I think this is one for @Silver to try :D
 
I almost forgot.

So the coil I posted... flavour is good :D condensed milk is going down nicely.

Vapour production is average but daaaaaaaaaaaaaam the throat hit is quite hectic considering the coil is sitting quite low.

I think this is one for @Silver to try :D
how old is your condensed milk bro?

Sent from my GT-I9500 using Tapatalk HD
 
mine seems like it needs a good steep

Sent from my GT-I9500 using Tapatalk HD
 
got it today was made with last batch

Sent from my GT-I9500 using Tapatalk HD
 
CVS, I did send it with strick instructions to leave it to steep for another week :D

sent from a Reo & MVP happy cloud
 
Hi all, wonder if this has happened to you before on your Reo/RM2

My 0.9 ohm simple micro coil in my "Tarks Matador" reo started becoming muted the past 2 days. It works but its asif its firing with less power.

Changed battery, checked posts were tight, rewicked (cotton) - still the same. I even did a voltage drop test. Was 0.2 volts, so thats okay.

Then last night I decided to change the coil and make a new one. Voila! Back to its usual self, firing with gusto

When I loosened the one post screw, the one leg "disappeared". Ie snapped off. So that was the problem, it was probably on its way out. Just that looking at it before, one would never tell that this was happening.

I think i had that coil in there for a few weeks, so it was quite old. But am wondering if mybe my post screws are damaging the wire. Do they need to be filed on the RM2?

Anyway, just a headsup. If your coil is not working properly but all looks fine, just make another one.
 
Hi all, wonder if this has happened to you before on your Reo/RM2

My 0.9 ohm simple micro coil in my "Tarks Matador" reo started becoming muted the past 2 days. It works but its asif its firing with less power.

Changed battery, checked posts were tight, rewicked (cotton) - still the same. I even did a voltage drop test. Was 0.2 volts, so thats okay.

Then last night I decided to change the coil and make a new one. Voila! Back to its usual self, firing with gusto

When I loosened the one post screw, the one leg "disappeared". Ie snapped off. So that was the problem, it was probably on its way out. Just that looking at it before, one would never tell that this was happening.

I think i had that coil in there for a few weeks, so it was quite old. But am wondering if mybe my post screws are damaging the wire. Do they need to be filed on the RM2?

Anyway, just a headsup. If your coil is not working properly but all looks fine, just make another one.
For sure that happens. Yes, you can file the screw end a bit, but also important not to over tighten. As you tighten you will see the tail end of the wire starting to move. When that happens, give it one more turn and that is usually enough, but depends on your setup.
 
Thanks @Andre

Another gripe I have is with one of my mom's LP grands / LP RM2 (@Poppie) :

I just cannot get it so that the airhole is where I want it (ie the 9 o clock to 3 o clock area as per @Andre ' s diagram)
It always ends up in the other half.

Have tried without an o-ring, with the thin one and the fatter one. I dont want to overtighten either.

Has anyone had a "positioning problem" and how did you resolve it?
 
Thanks @Andre

Another gripe I have is with one of my mom's LP grands / LP RM2 (@Poppie) :

I just cannot get it so that the airhole is where I want it (ie the 9 o clock to 3 o clock area as per @Andre ' s diagram)
It always ends up in the other half.

Have tried without an o-ring, with the thin one and the fatter one. I dont want to overtighten either.

Has anyone had a "positioning problem" and how did you resolve it?
Try one of the o-rings in the cap of the juice bottle, if you have a spare.
 
Try one of the o-rings in the cap of the juice bottle, if you have a spare.

Ok thanks, havent tried that yet. Will do so
Thanks for the suggestion @Andre!
I noticed that one is even thicker
 
Hi all, wonder if this has happened to you before on your Reo/RM2

My 0.9 ohm simple micro coil in my "Tarks Matador" reo started becoming muted the past 2 days. It works but its asif its firing with less power.

Changed battery, checked posts were tight, rewicked (cotton) - still the same. I even did a voltage drop test. Was 0.2 volts, so thats okay.

Then last night I decided to change the coil and make a new one. Voila! Back to its usual self, firing with gusto

When I loosened the one post screw, the one leg "disappeared". Ie snapped off. So that was the problem, it was probably on its way out. Just that looking at it before, one would never tell that this was happening.

I think i had that coil in there for a few weeks, so it was quite old. But am wondering if mybe my post screws are damaging the wire. Do they need to be filed on the RM2?

Anyway, just a headsup. If your coil is not working properly but all looks fine, just make another one.

100% Hi Ho @Silver that indeed happened to me... I cleaned it... I nolax'ed it I rewicked it and only when I finally looked closely at the coil under my lighted magnifying glass did I realise the one leg had broken... it caused me two days of pain and anguish!
 
Thanks @Andre

Another gripe I have is with one of my mom's LP grands / LP RM2 (@Poppie) :

I just cannot get it so that the airhole is where I want it (ie the 9 o clock to 3 o clock area as per @Andre ' s diagram)
It always ends up in the other half.

Have tried without an o-ring, with the thin one and the fatter one. I dont want to overtighten either.

Has anyone had a "positioning problem" and how did you resolve it?

I have that problem with my Woodvils and it drives my up the wall! I have not found a real solution to it yet despite playing with O-Rings. It's either too loose or too tight. :-@
 
I have that problem with my Woodvils and it drives my up the wall! I have not found a real solution to it yet despite playing with O-Rings. It's either too loose or too tight. :-@
Try a drip tip o-ring or similar around the 510 connection of the atomizer - that sometimes works.
 
So I thought I'll give the Igo a try today. Really impressed!!! Went for a ugly coil, 5 wraps @ 0.57 ohms with cotton. Flavor is really awesome and vape is very good.
image.jpg image.jpg
 
sooo I went further down the dark hole. did a 8wrap 26g 2mm id dual coil. this setup is a monster of note. so far the efest are keeping up I built last night at 8pm puffed till about 11pm and vaped the same battery till now and when I switched out battery was at 3.6v which still had a decent kick.
uvamena2.jpg
e4y4u9up.jpg
ahe3asas.jpg


Sent from my GT-I9500 using Tapatalk HD
 
sooo I went further down the dark hole. did a 8wrap 26g 2mm id dual coil. this setup is a monster of note. so far the efest are keeping up I built last night at 8pm puffed till about 11pm and vaped the same battery till now and when I switched out battery was at 3.6v which still had a decent kick.
uvamena2.jpg
e4y4u9up.jpg
ahe3asas.jpg


Sent from my GT-I9500 using Tapatalk HD
Wow, to build an ugly coil that neat must be more difficult than a micro coil! And your are playing far from your usual resistance? Because you are now trying 6 mg nic?
Build my Atomic with micro dual coils to 0.4 ohms. That get me Silver plated, but the flavour is not up there for me. Posted some pics here.
 
Wow, to build an ugly coil that neat must be more difficult than a micro coil! And your are playing far from your usual resistance? Because you are now trying 6 mg nic?
Build my Atomic with micro dual coils to 0.4 ohms. That get me Silver plated, but the flavour is not up there for me. Posted some pics here.
Yes @Andre vaping 6mg since monday I think and im loving it. For me the flavor on the atomic is the best out of all drippers I have used so far. havent tried a cyclone yet. loving the subohm dark side

Sent from my GT-I9500 using Tapatalk HD
 
P
sooo I went further down the dark hole. did a 8wrap 26g 2mm id dual coil. this setup is a monster of note. so far the efest are keeping up I built last night at 8pm puffed till about 11pm and vaped the same battery till now and when I switched out battery was at 3.6v which still had a decent kick.
uvamena2.jpg
e4y4u9up.jpg
ahe3asas.jpg


Sent from my GT-I9500 using Tapatalk HD
Pretty awesome looking coils @Cape vaping supplies
6mg nic is the way... no just to figure how you produce them clouds
 
I had to remake 3 coils last night on the RM2, because the negative post screw kept gutting the wire, well as soon as I started positioning the coil with the mandrel inserted. I think I'm a serial over tightener. :confused:

Started using a tiny screwdriver that came bundled with one of the Kayfuns, this thing has very little torque. So it's just finger tight now, and holding strong.
 
Back
Top