The Reomiser 2

[Marzuq]

I found a very good coil built.
Its a normal Micro coil with 26gauge wrapped 8times around a 1/16 drillbit that comes out as 0.8 ohms
Ive aligned it in the middle of the deck and aligned it so the center of the coil aligns directly over the airholes (I drilled a second airhole on the opposite side). Then I wicked it like the hurricane coil, not through the coil, but around it like a donut.
So airflow goes directly through the coil from both sides
Flavor is the best ive tasted yet and vapor production is great.
What do u guys think?

very impressive coil bro!!
very similar concept to the hurricane coil build.

 

[Yiannaki]

Guys, just a heads up. I have just merged the 'I have built the Perfect coil" thread into the Reomiser thread.

 

[Yiannaki]

With tapatalk down this weekend, I didn't get a chance to share some rm2 builds.

First was a bit of an experiment.

Single Coil
Triple Twisted 30g, with 0.8x0.1 mm ribbon.
2.0mm id
6 wraps
0.43 ohms
Cotton Wick

Verdict? It was quite slow to heat up, flavour was meh, vapour sucked. But it sure looked cool

 

[Yiannaki]

One of my favourite builds, regardless of the atty:

Single coil
26g
2.0mm ID
7 Wraps
0.67 ohms
Cotton Wick

Verdict: Simply Awesome. This for me, is my favourite single coil build at the moment with regards to flavour. It's warm, dense and full bodied!

 

[Alex]

Awesome coiling @Yiannaki

 

[Yiannaki]

Awesome coiling @Yiannaki

Thanks @Alex

I find coil building therapeutic

 

[Alex]

Thanks @Alex

I find coil building therapeutic

Me too I just ripped out a perfectly great coil on the Atomic to replace it with a twisted 27g. And also to test a 2mm ID. Not crazy about this one yet.

 

[Yiannaki]

Me too I just ripped out a perfectly great coil on the Atomic to replace it with a twisted 27g. And also to test a 2mm ID. Not crazy about this one yet.

I hate it when that happens!

Then you end up living with regret

Where did you manage to get some 27g from?

 

[Al3x]

So I did the second build on my reo with ribbon, this is the first-time I tried ribbon and I must say pretty impressive so far 5 wraps 1.8mm 0.9 ohms


Wicked it with cotton

 

[johan]

So I did the second build on my reo with ribbon, this is the first-time I tried ribbon and I must say pretty impressive so far 5 wraps 1.8mm 0.9 ohms
View attachment 12507

Wicked it with cotton

This is my favorite coil in Reo, I just wick with Ekowool or ceramic, and 4 wraps.

 

[Rob Fisher]

I wonder if there is an RM2 AIRFLOW on the cards!

 

[huffnpuff]

Me too I just ripped out a perfectly great coil on the Atomic to replace it with a twisted 27g. And also to test a 2mm ID. Not crazy about this one yet.

Currently I liking twisted 28G, 5-6 wraps over 2x1.5mm drill bits taped together..ie ends up as a 1.5x3mm oval. Fits nice in RM and Atomic. Same coil build works nice with single 26G too. Wicking with 4 strands of Bamboo

 

[huffnpuff]

I wonder if there is an RM2 AIRFLOW on the cards!

View attachment 12518 View attachment 12519 View attachment 12520 View attachment 12521

Frikkin Epic. I suppose it can function as AFC too. I could definitely use a catch cup like this ( My subconcious can't come to terms that a Reo bottle is not a stress ball)

 

[Andre]

So I did the second build on my reo with ribbon, this is the first-time I tried ribbon and I must say pretty impressive so far 5 wraps 1.8mm 0.9 ohms
View attachment 12507

Wicked it with cotton

You can coil, Sir - very neat.

 

[annemarievdh]

Cleaned Thor tonight, build a new ugly coil and rayen wick. 28g 6 wraps, exactly 1ohm.

Vapes like a dream !!!


Sent with the Reo Thor

 

[Andre]

Cleaned Thor tonight, build a new ugly coil and rayen wick. 28g 6 wraps, exactly 1ohm. View attachment 12576View attachment 12577View attachment 12578View attachment 12579View attachment 12580View attachment 12581View attachment 12582

Vapes like a dream !!!


Sent with the Reo Thor

Nothing like a clean Reo, freshly coiled and wicked. Enjoy. You have it down pat.

 

[Yiannaki]

Cleaned Thor tonight, build a new ugly coil and rayen wick. 28g 6 wraps, exactly 1ohm. View attachment 12576View attachment 12577View attachment 12578View attachment 12579View attachment 12580View attachment 12581View attachment 12582

Vapes like a dream !!!


Sent with the Reo Thor

Super coiling there

Glad you're enjoying it!

It seems the so called 'ugly' coil is very popular around here

I am very curious about the way you've wicked the coil, with the one tail going between the two posts. Do you find it wicks better?

 

[annemarievdh]

Super coiling there

Glad you're enjoying it!

It seems the so called 'ugly' coil is very popular around here

I am very curious about the way you've wicked the coil, with the one tail going between the two posts. Do you find it wicks better?

I've tried a couple of wicking the coils an this just gives me nice vape. I put it under neath the leg and the coil thru to the back


Sent with the Reo Thor

 

[Yiannaki]

I've tried a couple of wicking the coils an this just gives me nice vape. I put it under neath the leg and the coil thru to the back


Sent with the Reo Thor

Thanks for sharing

I should give this coil setup a try the next time I recoil my atties

Judging by the resistance I'm guessing it's on a 2mm mandrel right?

 

[annemarievdh]

Thanks for sharing

I should give this coil setup a try the next time I recoil my atties

Judging by the resistance I'm guessing it's on a 2mm mandrel right?

Its done on this



Sent with the Reo Thor

 

[johan]

Its done on this
View attachment 12583


Sent with the Reo Thor

Thats exactly 2mm

 

[Yiannaki]

Its done on this
View attachment 12583


Sent with the Reo Thor

Yep that's about 2mm I think.

I use it as my secondary mandrel to install my dual coils

 

[annemarievdh]

Thats exactly 2mm

Thank you @johan i really didn't know


Sent with the Reo Thor

 

[johan]

Thank you @johan i really didn't know


Sent with the Reo Thor

measured with a vernier.

 

[annemarievdh]

measured with a vernier.

I still want one of thous


Sent with the Reo Thor