The Reomiser 2

And so it starts :D

The Reomiser 2 comes with an o-ring ... do you just put it in the catch cup, or stretch it over the "lip" at the bottom of the atty?

Ta
 
LandyMan said:
And so it starts :D

The Reomiser 2 comes with an o-ring ... do you just put it in the catch cup, or stretch it over the "lip" at the bottom of the atty?

Ta
Click to expand...
Just put it in the catch cup around the 510 connection. To prevent juice from leaking out there and to help you position the air hole correctly.
 
LandyMan said:
Anyone drilled out the air hole on the Reomiser 2? I need slightly more air :)
Click to expand...

@LandyMan i took the 1.4mm screw driver, it just does not go into the air hole. i worked that in there, the flavour is still very good, you still cant really do lung hits with it but you get a slightly looser mouth to lung draw. The metal is actually quite soft so it was easy. I will not go bigger, it's perfect now :)
 
the metal is soft he says. he obviously didn't have a pindrill with a blunt drill tip ;) loads of elbow grease later and i enlarged the airhole a wee bit. the standard airhole was just too tight a draw for me
 
kimbo said:
@LandyMan i took the 1.4mm screw driver, it just does not go into the air hole. i worked that in there, the flavour is still very good, you still cant really do lung hits with it but you get a slightly looser mouth to lung draw. The metal is actually quite soft so it was easy. I will not go bigger, it's perfect now :)
Click to expand...
Thanks @kimbo ... I have a Stillare V2 incoming from @JakesSA so not sure I really want to mess with the Reomiser 2
 
I think mine has a 2mm airhole. Bought it like that. I like the draw but no experience with the smaller airhole.
 
LandyMan said:
Anyone drilled out the air hole on the Reomiser 2? I need slightly more air :)
Click to expand...
Many, many Reonauts make it larger, by hand or by drill. Just do it gradually, till you find your sweet spot. Imo you have now vaped on it long enough to know the air hole is too small for you. Do it.
 
Andre said:
Many, many Reonauts make it larger, by hand or by drill. Just do it gradually, till you find your sweet spot. Imo you have now vaped on it long enough to know the air hole is too small for you. Do it.
Click to expand...
Jip ... hence my question. I did however fit a different drip tip this afternoon, which is already making quite the difference.
 
LandyMan said:
Jip ... hence my question. I did however fit a different drip tip this afternoon, which is already making quite the difference.
Click to expand...
Wider bore, I presume? Personally, have never enlarged the air holes on the RM2 and vape it happily on a shortish, relatively wide bore tip alongside an Odin and Cyclops with wide open air.
 
Andre said:
Wider bore, I presume? Personally, have never enlarged the air holes on the RM2 and vape it happily on a shortish, relatively wide bore tip alongside an Odin and Cyclops with wide open air.
Click to expand...
Yes, an infinite wide bore a friend picked up for me at vape King today.
Can't wait for the Stillare to try that.
Jane is my all day device. Decided to switch to the BEC Pro with Atlantis in Mech Mode. The REO spoiled everything else for me is all I will say :D
 
Just catching up on this thread

I think the RM2 is a wonderful atty and certainly keeps me happy. Am trying to experiment with others for lung hitting, but I am happy with my RM2 and mouth to lung for all day vaping at the moment.

@kimbo, for more TH, just raise that coil higher. I saw the pic of your staged coil and it needs to be quite a bit higher. Dont worry if the wick dangles down, as long as it makes contact with the ceramic deck it will wick fine. What I do is take off the RM2 cap and position it next to the coil at the same height as if the cap was screwed on, then I can see where the airhole is in relation to the coil. For good TH on the tobaccoes I make it so the bottom of the coil is about in line with the top of the airhole. In that position the coil is usually slightly higher than the post screws. Just play around with different heights. I found just a mm or two change in height can make a massive difference in TH. Hope it helps.
 
Silver said:
Just catching up on this thread

I think the RM2 is a wonderful atty and certainly keeps me happy. Am trying to experiment with others for lung hitting, but I am happy with my RM2 and mouth to lung for all day vaping at the moment.
Click to expand...

Same here. The RM2 is very nice for mouth to lung, and even better now for me with the wider drip tip.
 
After trying funny builds and twisted wire I decided to keep it simple for a while.

c1be76828b4070ebbc2fe1fbf101010e.jpg


Flavour is slightly less than with twisted wire. TH is slightly more. I noticed I go through less juice with this one. Its still around the 0.7 ohm mark.

@LandyMan as soon as you start widening the airhole you lose flavour. My RM is opened to 1.3mm which has a bit of flavour loss, not much, but gives me the draw I like.
 
Maybe I should buy myself an RM2 again... I don't have any left! Oh and then I remember it has a screw off top and the need goes away! :confused:
 
Rob Fisher said:
Maybe I should buy myself an RM2 again... I don't have any left! Oh and then I remember it has a screw off top and the need goes away! :confused:
Click to expand...
I love the fact that it screws on. The airhole stays in the right place and no leaking. Also the ceramic deck is a winner.
 
Gazzacpt said:
I love the fact that it screws on. The airhole stays in the right place and no leaking. Also the ceramic deck is a winner.
Click to expand...

+1 on that @Gazzacpt the screw top makes a huge difference, and since it's on a reo you don't need to take it off unless you doing a wick change.

I ordered an atomic from VapeClub so I'm eager to see how it stands up against my RM2 for flavour



Sent from my S4 LTE using my finger
 
Gazzacpt said:
After trying funny builds and twisted wire I decided to keep it simple for a while.

c1be76828b4070ebbc2fe1fbf101010e.jpg


Flavour is slightly less than with twisted wire. TH is slightly more. I noticed I go through less juice with this one. Its still around the 0.7 ohm mark.

@LandyMan as soon as you start widening the airhole you lose flavour. My RM is opened to 1.3mm which has a bit of flavour loss, not much, but gives me the draw I like.
Click to expand...
My RM2s have been like that almost always. Lately been doing ugly coils, even easier. The easier and the less trouble, the better for me.
 
Dr Evil said:
+1 on that @Gazzacpt the screw top makes a huge difference, and since it's on a reo you don't need to take it off unless you doing a wick change.

I ordered an atomic from VapeClub so I'm eager to see how it stands up against my RM2 for flavour



Sent from my S4 LTE using my finger
Click to expand...
Ive done that experiment and honestly the rm2 performs way better than the atomic wrt flavor.


Sent from my iPhone using Tapatalk
 
Keyaam said:
Ive done that experiment and honestly the rm2 performs way better than the atomic wrt flavor.


Sent from my iPhone using Tapatalk
Click to expand...

Depending on the build, and the airflow choices though.


via iphone
 
You must log in or register to reply here.

Similar threads

Rob Fisher
The One
Replies
4
Views
451
Amir
Amir
Downtown Vapoury
New Arrival: The Lost Vape URSA Nano Pro 2
Replies
0
Views
124
Downtown Vapoury
Downtown Vapoury
Vape Vision
How To Vape: The Ultimate Guide You’ll Ever Need
Replies
3
Views
450
Old_Goat
Old_Goat
SessionDrummer
Sterling Cloud Flavors Reviewed by SessionDrummer
Replies
0
Views
167
SessionDrummer
SessionDrummer
SessionDrummer
Flavor Artists flavors Reviewed by SessionDrummer
Replies
3
Views
174
SessionDrummer
SessionDrummer
Back
Top