I tried a demo Twisp Cue today and I must say I loved it BUT I would never go that route because there are only 3 flavours. For me, it's the flavours that make vaping such fun!
TWISP CUE | PRODUCT OVERVIEW
- Thread starter HPBotha
- Start date
Hi @Hooked
As discussed in the other Twisp Cue thread inside the Twisp subforum, they did mention they were looking at rolling out other flavours for the Cue. I do agree with you that 3 is too limited. Lets hope they come out with several other great flavour options.
Good idea!!! i will have to have a think on it...and plan a good way of getting the right answers.
Let me work on something this week. will pop something up under the Twisp forum - sure many will want to pitch in!
Hi @HPBotha any news about this?
I will be doing a run down on our new HP flavours very soon, and will then have a flavour questionnaire ;-D
Ok? So after all the hype, decided to get me a Cue on the weekend
and i was just really starting to like this cute little guy
that is until it decided to take a dump in my shirt pocket today!!! 
so now i will see how long we will not be on speaking terms
coz if there is ONE thing that really ruffles my feathers (maybe i should post in the "what irritates me" thread
) it is leaking gear
Oh well...., so much for that
Sent from my MI 4W using Tapatalk
and i was just really starting to like this cute little guy
that is until it decided to take a dump in my shirt pocket today!!! 
so now i will see how long we will not be on speaking terms
coz if there is ONE thing that really ruffles my feathers (maybe i should post in the "what irritates me" thread
) it is leaking gear Oh well...., so much for that
Sent from my MI 4W using Tapatalk
Ok? So after all the hype, decided to get me a Cue on the weekend
Oh well...., so much for that
Sent from my MI 4W using Tapatalk
It hasn't leaked on me yet (I have only tried 3 pods so far) - but now you have me worried @Spongebob !
That's not good news at all @Slick
I was thinking this is the ideal device to slip in my shirt pocket when wearing a suit.
I despise leaking devices
Maybe it was a troublesome batch of pods.
My pods have been fine but I guess my sample size is way too low
@HPBotha help us out here.
Any feedback on leaky pods from your side? Is this a small problem or should we worry.
Any knowledge of which pods are prone to leaking? Maybe those newer ones with the translucent sides? (My non-leaky pods are the "older" opaque ones)
Thank you @Spongebob and @Silver for bringing this to my attention. Can you please email (heinrich@twisp.co.za) photos of the pod that is leaking, or any other incidents?
I have informed the team, and we will investigate in the morning in earnest.
We have a very large volume of pods in circulation, and we have stringent quality control measures in place for manufacturing the Pods, the liquids and for filling. We would like to identify the location of the leaking, and subsequently revise our QC protocols.
Should the Pod be cracked - and the seal at the base of the pod is compromised, there might be leaking. What we need to identify further is if the Pod plastic, the seal or the Pod base is the problem. Not only that, but also the incident rate! Out of the initial 380 000 pods manufactured, what % has leaked.
**please do not mistake condensation for leaking, this is normal and can be expected from time to time**
Sorry if I cannot give you a straight answer now, but i will endeavour to give you some feedback tomorrow.
Once again, thank you for letting me know. We rely on the community to give us constructive feedback!
I have informed the team, and we will investigate in the morning in earnest.
We have a very large volume of pods in circulation, and we have stringent quality control measures in place for manufacturing the Pods, the liquids and for filling. We would like to identify the location of the leaking, and subsequently revise our QC protocols.
Should the Pod be cracked - and the seal at the base of the pod is compromised, there might be leaking. What we need to identify further is if the Pod plastic, the seal or the Pod base is the problem. Not only that, but also the incident rate! Out of the initial 380 000 pods manufactured, what % has leaked.
**please do not mistake condensation for leaking, this is normal and can be expected from time to time**
Sorry if I cannot give you a straight answer now, but i will endeavour to give you some feedback tomorrow.
Once again, thank you for letting me know. We rely on the community to give us constructive feedback!
I have run all 3 pods and haven't had any issues with any of them.
This could just be a isolated incident where something may have caused this.
@Rob Fisher has been to Europe and back and has not reported any problems either.
I think we pretty safe @Silver , but it will be interesting to know the cause of @Spongebob problem, maybe the pod was just a "bad apple".
This could just be a isolated incident where something may have caused this.
@Rob Fisher has been to Europe and back and has not reported any problems either.
I think we pretty safe @Silver , but it will be interesting to know the cause of @Spongebob problem, maybe the pod was just a "bad apple".
I bought one and so far 2 of the three pods are leaking.Ok? So after all the hype, decided to get me a Cue on the weekend
Oh well...., so much for that
Sent from my MI 4W using Tapatalk
I used the device two, maybe three times and have also not touched it again.
Sent from my SM-G935F using Tapatalk
Thanks @HPBotha
Lets see if we can give you some further feedback here with photos
I will certainly report back here of I encounter any leaks. I am sure @Rob Fisher will do the same.
Just let me know if those new pods with the translucent viewing windows are released?
I used mine on a trip to Europe and had some condensation but the pods never leaked and that was on four flights.
Sent from my iPhone using Tapatalk
Why do i always get the bad apples then? 
below some photos of the "offending" pod that "offended" me..... 
I did notice before the leak that whenever i took the pod out of the mod, it seemed very wet underneath? More then condensation would/should warrant?
Then yesterday, the Cue was lying on its side in my shirt pocket, and when taking it out upon getting home, i got a whole hand full of juice and a mod tacky and wet with juice
Hope this can shed some light on the issue???
Sent from my MI 4W using Tapatalk
below some photos of the "offending" pod that "offended" me..... 
I did notice before the leak that whenever i took the pod out of the mod, it seemed very wet underneath? More then condensation would/should warrant?
Then yesterday, the Cue was lying on its side in my shirt pocket, and when taking it out upon getting home, i got a whole hand full of juice and a mod tacky and wet with juice
Hope this can shed some light on the issue???
Sent from my MI 4W using Tapatalk
Side note.... Zoom in on the 3rd photo and notice the wetness after i dried it yesterday, and i did not vape it today? Was lying at home on my bedside table?
Sent from my MI 4W using Tapatalk
Sent from my MI 4W using Tapatalk
Yip, im no astronaut lol, but that looks like leaking to me, rather than condensation
Damn, and i was so starting to like this little guy......
Sent from my MI 4W using Tapatalk
Damn, and i was so starting to like this little guy......
Sent from my MI 4W using Tapatalk
I had to go and open my big mouth yesterday.
Today i pulled out the pod from the body and it was covered in juice
Not too the point where it seeped out the body but definetly not condensation.
Will carry on testing and hope for the best.
Today i pulled out the pod from the body and it was covered in juice
Not too the point where it seeped out the body but definetly not condensation.
Will carry on testing and hope for the best.
Decided to take my current Polar Mint pod out and this is what it looked like
Not leaking out the body but definitely looks like more than condensation.
Same as @Clouds4Days
@HPBotha tell your QC peeps we've got a problem
That said the vape is still working ok.
Strangely it didn't do this on my previous two pods. I did take them out a few times to inspect.
However I am now not so trustworthy about it not leaking in my pocket.
Not leaking out the body but definitely looks like more than condensation.
Same as @Clouds4Days
@HPBotha tell your QC peeps we've got a problem
That said the vape is still working ok.
Strangely it didn't do this on my previous two pods. I did take them out a few times to inspect.
However I am now not so trustworthy about it not leaking in my pocket.
Decided to take my current Polar Mint pod out and this is what it looked like
Not leaking out the body but definitely looks like more than condensation.
Same as @Clouds4Days
@HPBotha tell your QC peeps we've got a problem
That said the vape is still working ok.
Strangely it didn't do this on my previous two pods. I did take them out a few times to inspect.
However I am now not so trustworthy about it not leaking in my pocket.
Yip that's exactly how mine looked today @Silver
Thank you for the photos. @Spongebob sent me the same this morning, and it helped allot to confirm a few things for us.
We have our own ideas on the cause, but give me a few more days to give you clear feedback. We have been in communication with the factory regarding one issue we picked up, as you can imagine we take this very seriously and would like to get this resolved before the next batch goes into production!!
We have our own ideas on the cause, but give me a few more days to give you clear feedback. We have been in communication with the factory regarding one issue we picked up, as you can imagine we take this very seriously and would like to get this resolved before the next batch goes into production!!
Similar threads
