Must maybe look at the recurve as another option for later on. Seeing a lot of positive feedback on it. And that just looks good on that Coppervape
, I have a black one so may have to play matchy matchy, or just plain bling it out.
Wotofo Recurve RDA
- Thread starter MoneymanVape
- Start date
-
- Tags
- rda
, I have a black one so may have to play matchy matchy, or just plain bling it out.
Awesome Recurve setup @Raindance
Let us know how it goes with the higher ohms
Let us know how it goes with the higher ohms
So after much unm’ing and ahh’ing I ordered a recurve from fasttech along with a couple of vandyvape pulse 80 watt squonk bottles as I’ve been told they fit the rsq squonk mod.
Should have it sometime next week or end of week hopefully. Usually things from FT take about 5-7 days to get to me.
Looking forward to giving the recurve a good bash, heard generally good things about it.
Should have it sometime next week or end of week hopefully. Usually things from FT take about 5-7 days to get to me.
Looking forward to giving the recurve a good bash, heard generally good things about it.
What mode of delivery did u choose ??
He's in the UK
The e packet shipping is what I normally use. But as it’s bank holiday here in the U.K., I may not get it till next week.
@Yas786 - please let use know how the VV Pulse bottles work on the RSQ.
That's my setup: RSQ + Recurve = AWESOMENESSSS
Ok so I got my recurve this morning, pretty fast considering I ordered it last fri.
Anyhow the recurve?? Not a bad rda in all honesty. Airflow is a bit too wide open for my liking but still messing around with it. I put one of the coils it comes with, comes out to .21ohm and vaping at 45 watts and the flavour is pretty good in all honesty. Definitely be in my rotation but as I said I’m still playing around with coil placement etc.
Also got my 2 vandy vape pulse squonk bottles that come with the pulse bf80 mod. It does work with the rsq but you will have to probably cut some of the tubing off in order for it to fit.
Feels good and squonks pretty well considering it’s not made for the rsq.
Picked up 2 of them and both work fine in the rsq. Will try the other bottle in my other squonk, rebel vapes dna75c squonk mod but looking at it, it looks like it will work as well.
So after a few hrs of playing and vaping I have to say the lower the coil the better for flavour.
One thing I like is the weight of the rda, very solid and weighs a fair bit compared to my other rda’s.
One thing I like is the weight of the rda, very solid and weighs a fair bit compared to my other rda’s.
So i have been driving myself around the bend the last few days with my recurve.
I used the supplied wotofo coils in the recurve as wel as a pulse 22mm.
In the recurve i get spitback for days. Nothing helped, lifting the coil, lowering the coil, spacing the coil. Vapes good for about 3 to 4 squonks, then spitback on anything over 26w ( 0.25 ohm build)
None of these issues on the pulse 22mm with the same coil.
Any help? Anyone else have this issue?
Pic of last build for reference.
I used the supplied wotofo coils in the recurve as wel as a pulse 22mm.
In the recurve i get spitback for days. Nothing helped, lifting the coil, lowering the coil, spacing the coil. Vapes good for about 3 to 4 squonks, then spitback on anything over 26w ( 0.25 ohm build)
None of these issues on the pulse 22mm with the same coil.
Any help? Anyone else have this issue?
Pic of last build for reference.
So more cotton then?
Will give it a go and report back. Thanks.
A few things can cause spitback in the Recurve:
- Loose cotton allowing phase-changing juice close to the coil to form bubbles of vapor which propels the super-heated juice above it outward
- Squonking excessively/repeatedly or on a wick that's already saturated, causing excess juice surrounding the coils thus leading to the same effect as above on the outer coil.
- Squonking at an angle (i.e. not upright), which causes the device to only reabsorb until the juice level falls below the return pipe at which point it will equalise with air instead of juice, ergo any excess juice left in the juicewell will be kissed by the belly of your coils and lead to point 1 above when klapping it (although this will also most likely lead to leaking from the air holes over time)
Last edited:
26w? That seems super low, running mine with the same coil at 45 and no issues with spitback.
So i sorted it out. Got home, ripped the wotofo coil out, placed a coil company coil in (comes to 0.39 ohm) and wicked it nice and thick inside the coil, tapering the wick towards the bottom of the build deck (imagine the shape of a ponytail on a woman's back), and seems to be going like a boing now. Vaping at 40w no spitback and nice thisc flavourfull clouds.
Thanks for all the help and advice guys.
Thanks for all the help and advice guys.
Try the same thicker wicking with the Wotofo coils, those supplied coils are actually pretty good. Only thing I would change is don’t space the coils and also no need for Pony Tail wicking, I cut my wick straight as the wick well it goes into is straight.
Could just be that one Wotofo coil that’s messed up, maybe something went wrong when you tried spacing them.
Could just be that one Wotofo coil that’s messed up, maybe something went wrong when you tried spacing them.
Tried it multiple times, with many wicking methods before i spaced the coil, always had the spitback. Baring in mind that i have the same wotofo coil in my pulse 22mm without the issues. I have to assume that the issue came from too much airflow, or maybe the chaimber on the recurve is too tight for my draw style.
Honestly, i do not want to mess around with anything right now, as i finally love the vape i am getting from the recurve right now.
Picked up my pulse and recurve today based on this thread. Thanks guys.
Quick question though, can you use the regular BF pin on a non squonk device and use it as a regular dripped ? I thought it came with a different 510 pin that doesn’t have a hole
Sent from my iPhone using Tapatalk
Quick question though, can you use the regular BF pin on a non squonk device and use it as a regular dripped ? I thought it came with a different 510 pin that doesn’t have a hole
Sent from my iPhone using Tapatalk
Yip, works fine. Used a clone I had which omly had a BF pin with minimal condensation on the mods 510 pin.
Still wasn't crazy about the idea so i stuffed cotton into the pin from the top when rewicking, then there was zilch on the 510 pin of the mod. Especially on drippers where you only really paint and there is no juice welling up. If the juice is thick it won't just trickle down the hole instantly.
I have to add that you will be doing that at your own risk and with the two RDA's you bought, jist swap the pins, much easier than having to worry.
Yup, I received and use my Recurve with a normal 510 pin. Maybe check those baggies out again. The pin is quite small although it is gold plated.
Ok cool. Wasn’t sure if you could just swop Out the pins from another rta
Sent from my iPhone using Tapatalk
Haha shot. Didn’t realize those other bags had stuff in them. Though they were just coils. Shot all sorted
Sent from my iPhone using Tapatalk
Similar threads
