Bumpedy Bump - Vape Mail!

[Deckie]

Thx order placed , now the wait .... indecently what's a good fit BF atty wise ?

Hi @Daniel . I'm in no ways an expert but currently I'm using the Origen OL16 & needless to say I'm happy with this little beast. See the thread below.
http://www.ecigssa.co.za/the-origen-little-16-bf-thread.t17297/

Any 22mm bf atty will fit perfectly so try what you are used to at first & see. I know Fasttech are selling clones of the OL16 - quality of these clones, nobody can say as yet although a few forumites have ordered including myself but not as yet received them - the long wait continues. I know @SAVapeGear got in a few originals but as far as I'm aware they are all sold out, but watch the classifieds, you never know.

 

[Daniel]

Hi @Daniel . I'm in no ways an expert but currently I'm using the Origen OL16 & needless to say I'm happy with this little beast. See the thread below.
http://www.ecigssa.co.za/the-origen-little-16-bf-thread.t17297/

Any 22mm bf atty will fit perfectly so try what you are used to at first & see. I know Fasttech are selling clones of the OL16 - quality of these clones, nobody can say as yet although a few forumites have ordered including myself but not as yet received them - the long wait continues. I know @SAVapeGear got in a few originals but as far as I'm aware they are all sold out, but watch the classifieds, you never know.

Yeah been eyeing those clones just can't seem to justify the price of an original will see what the other okes say, surely if the dimensions etc are the same it should be close to the real deal? Or am I opening up a can of worms?

 

[Deckie]

Yeah been eyeing those clones just can't seem to justify the price of an original will see what the other okes say, surely if the dimensions etc are the same it should be close to the real deal? Or am I opening up a can of worms?

If worms are on the menu then let's all eat. Nobody knows as yet the quality & I'm hoping that they are spot on or close as damn but I say wait until they start arriving & see what everyone's opinions are. Yes the originals cost a pretty penny but they are worth it but that depends on the outcome of the clones.

 

[Daniel]

If worms are on the menu then let's all eat. Nobody knows as yet the quality & I'm hoping that they are spot on or close as damn but I say wait until they start arriving & see what everyone's opinions are. Yes the originals cost a pretty penny but they are worth it but that depends on the outcome of the clones.

I have my own opinions about original vs clones but that's for another thread

 

[blujeenz]

Big thanks to the fine folks @Sir Vape

 

[incredible_hullk]

I think we need to start MASA...Mods Anonymous South Africa

FOMO!!!!

 

[Nailedit77]

New tank for me and hopefully 1st setup for the wife

 

[M5000]

Finally went unregulated, I stared at the fire button for 20 mins after it was fully setup and ready to go before pushing it, and stood behind the door and held my hand around and peeped and hit it for the first time, but yes I made it!..unlike new mods and tanks, this is a different experience.. my first WIRELESS setup..

 

[incredible_hullk]

Finally went unregulated, I stared at the fire button for 20 mins after it was fully setup and ready to go before pushing it, and stood behind the door and held my hand around and peeped and hit it for the first time, but yes I made it!..unlike new mods and tanks, this is a different experience.. my first WIRELESS setup..

View attachment 71764

View attachment 71765

View attachment 71766

congrats @M5000 ...u gonna enjoy it.
.i thought i was the only 1 that did that when i went mechs 2 months and now cant stand regulated mods

 

[incredible_hullk]

@M5000 ...i truly enjoy my reo vape on a ol16 coming in at 0.4 ohm duel coil kanthal...find the rm2 too restrictive

i will let u know quality when my clones come in frm fasstech via sapo row boat and compare to the original ol16

 

[Daniel]

@M5000 ...i truly enjoy my reo vape on a ol16 coming in at 0.4 ohm duel coil kanthal...find the rm2 too restrictive

i will let u know quality when my clones come in frm fasstech via sapo row boat and compare to the original ol16

Also ordered some the race is on!

 

[incredible_hullk]

Also ordered some the race is on!

contacted jimc yesterday..6 to 8 week delay on airmal...bloody baskets

 

[M5000]

Drip tips from @hands the man, great work once again! Add your tips here not seeing enough around.

 

[Rob Fisher]

my first WIRELESS setup..

Welcome to REOville!

 

[M5000]

Also ordered some the race is on!

Please post them I still got plenty to learn about the atty's. The RM2 is great for MTL which is not my main vaping style, maybe I'll get someone to drill a hole in it or something.. I'm very interested in the clones, even if they aren't perfect I can try a few and get an idea and get the authentic of the one suits me best..

 

[Daniel]

Please post them I still got plenty to learn about the atty's. The RM2 is great for MTL which is not my main vaping style, maybe I'll get someone to drill a hole in it or something.. I'm very interested in the clones, even if they aren't perfect I can try a few and get an idea and get the authentic of the one suits me best..

Personally I think not much difference between authentic vs clone ExCEPT post screws that's my pet peeve about clones. An atty is an atty is an atty if the dimensions and etc are the same can't see that it's different. My setup is the Reo with Cyclone AFC nice for MTL and if you want to blow some clouds open the air and tharrr she blows...

 

[Andre]

Finally went unregulated, I stared at the fire button for 20 mins after it was fully setup and ready to go before pushing it, and stood behind the door and held my hand around and peeped and hit it for the first time, but yes I made it!..unlike new mods and tanks, this is a different experience.. my first WIRELESS setup..

View attachment 71764

View attachment 71765

View attachment 71766

Stunning Reo. Most welcome to Reoville, Reonaut. Enjoy. And shout out in Reoville if you have any questions.

 

[Andre]

Please post them I still got plenty to learn about the atty's. The RM2 is great for MTL which is not my main vaping style, maybe I'll get someone to drill a hole in it or something.. I'm very interested in the clones, even if they aren't perfect I can try a few and get an idea and get the authentic of the one suits me best..

Very easy to enlarge that hole. Soft brass. Hand drill will do it easily.

 

[M5000]

@Daniel I suppose with simple designs they won't be too different but if you want to see differences play with Kayfun clones! Box of assorted screws is the answer, brand new authentic RTA's are coming with bad screws it's disappointing.

@Andre thanks very much, I got most of my info about Reo's from your posts in this forum. I will be heading over to Reoville very soon I have a long list of questions!

 

[Daniel]

@Daniel I suppose with simple designs they won't be too different but if you want to see differences play with Kayfun clones! Box of assorted screws is the answer, brand new authentic RTA's are coming with bad screws it's disappointing.

@Andre thanks very much, I got most of my info about Reo's from your posts in this forum. I will be heading over to Reoville very soon I have a long list of questions!

IMHO all attys are made in China... Yes there I said it...

 

[incredible_hullk]

@Daniel...the question is what is not made in the east nowadays..absolute advantage

 

[Daniel]

@Daniel...the question is what is not made in the east nowadays..absolute advantage

Learn from knife making Carbodize the screws titanium post sleeves with gold rods inside. Looking at designing my own atty... Watch this space

 

[Petrus]

IMHO all attys are made in China... Yes there I said it...

That is why I stick to Origen and Eden Mods/Atty's.

 

[Petrus]

Finally went unregulated, I stared at the fire button for 20 mins after it was fully setup and ready to go before pushing it, and stood behind the door and held my hand around and peeped and hit it for the first time, but yes I made it!..unlike new mods and tanks, this is a different experience.. my first WIRELESS setup..

View attachment 71764

View attachment 71765

View attachment 71766

Congratulations. Now the fun starts.

 

[Silver]

Congrats on the new Reo @M5000
Wishing you all the best with it and many happy vapes!!
Let me just say that the RM2 on the Reo produces the best MTL vape I have experienced
Just shout if you need any help with it.

Just a bit of advice - before you go massacre that perfect MTL machine by shoving drillbits into it to enlarge the airhole - remember it may be easy to enlarge the hole but not so easy to reverse that or make the hole fractionally smaller afterward.

I suggest you rather go very slowly with the enlargement process if you decide to do it. I have not done it myself but am lucky in that the stock airhole at 1.2mm produces a perfect draw to my preference.