Exvape Expromizer V4 MTL RTA

That is interesting @Silver. I’ve only used fruity menthols in mine so far. Keen to try a few tobaccos and see how they shine, or not


Sent from my iPad using Tapatalk

Thanks @Darth-vaper
I still need to try out fruity menthols in it - but I was hoping to get it set up as a good tobacco vape.
Will see

Still early days for me - I need to try another coil - but in the meantime, I am experimenting with different tobacco juices on the current coil
 
Thanks @Darth-vaper
I still need to try out fruity menthols in it - but I was hoping to get it set up as a good tobacco vape.
Will see

Still early days for me - I need to try another coil - but in the meantime, I am experimenting with different tobacco juices on the current coil

As soon as you make the change to a simple roundwire build of 2.5mm ID (try and get your resistance between 0.8 - 1ohm) please let me know what you think of the flavour @Silver
 
As soon as you make the change to a simple roundwire build of 2.5mm ID (try and get your resistance between 0.8 - 1ohm) please let me know what you think of the flavour @Silver

Thanks @Dela Rey Steyn
Am starting to think whether I should go for 26g or 27g (I have both).
27g is a bit crisper so it might work nicely - but I am thinking of starting off with 26g.

If I go 26g, how many wraps should I do? About 7 or 8? (2.5mm ID)
 
Thanks @Dela Rey Steyn
Am starting to think whether I should go for 26g or 27g (I have both).
27g is a bit crisper so it might work nicely - but I am thinking of starting off with 26g.

If I go 26g, how many wraps should I do? About 7 or 8? (2.5mm ID)

I'm using 26g, 8 wraps should have you right on the money, just under 1ohm if you are using kanthal.
 
By the way guys... you should really lube all the o-rings on this atty. Like ALL of them.
I took mine apart for a full clean and rebuild the other day, and I went through many tanks of flooding and rewicking, thinking the wick was the problem. But it turns out that the machining tolerances don’t prevent over-tightening, which distorts some o-rings causing leaks. Did some googling for flooding and saw lots of similar issues being reported because of this. Lubed them all up and been perfect since...


Sent from my iPad using Tapatalk
 
Just received confirmation from Brent @ Bearded Viking Customs that the bubble and straight tanks sections are done. Just waiting on Pricing and Pics. Whoooooop whoooooop! @Ruwaid
 
By the way guys... you should really lube all the o-rings on this atty. Like ALL of them.
I took mine apart for a full clean and rebuild the other day, and I went through many tanks of flooding and rewicking, thinking the wick was the problem. But it turns out that the machining tolerances don’t prevent over-tightening, which distorts some o-rings causing leaks. Did some googling for flooding and saw lots of similar issues being reported because of this. Lubed them all up and been perfect since...


Sent from my iPad using Tapatalk

That’s good to know because I’m getting a lot of gurgling and juice in the mouth
 
Either my Kharma is good or my Feng Shui is on point, I've not had a single issue with this tank since day one. Everything turns as it should, tightens as it should, no issues. Flavour is phenomenal, draw is excellent! It's the best MTL tank I've owned thus far.
 
Just received confirmation from Brent @ Bearded Viking Customs that the bubble and straight tanks sections are done. Just waiting on Pricing and Pics. Whoooooop whoooooop! @Ruwaid
Thanks bud @Dela Rey Steyn . Brent still hasn't gotten back to me but glad you got feedback for us. Still need to ask him how and when im getting my glasses back lol.
 
Thanks bud @Dela Rey Steyn . Brent still hasn't gotten back to me but glad you got feedback for us. Still need to ask him how and when im getting my glasses back lol.

He is busy making some silicone moulds for me bud and I asked while we were discussing the templates. He's not at the workshop now, but as soon as he is back he'll send me some pics.
 
Simple 26g SS316L roundwire build. 0.8ohms. Same wicking as yesterday, just the ends lightly thinned. JFC on largest hole only. 3 airflow holes open. If this thing did not produce Vapour, I would not have known that I was vaping! This thing is buttery smooth and quiet as a church mouse. I love my SS MTL builds for fruity flavours. The Panama really shines in this setup. So glad I have a second one incoming.
View attachment 208531
View attachment 208530 View attachment 208527 View attachment 208526 View attachment 208524 View attachment 208529
@SarelD
 
howzit guys
So Brent sent me back some glasses with my OG glasses. I was sent 2 x straight (one clear and one smoked) and 1 x bubble glass
So anyone looking for them...BVC should have them soon on their site.
Just a note...the smoked straight glass seems a tad bit shorter than the OG which causes slight sweating/leaking from the rubber seals as the base and glass aren't tight enough :( not sure if all are going to be like this but Brent will be notified.
If I have some time today will take out some side by side pics.
 
I'll def be in......would love a frosted black on this setup
af27f994270728e4d7c14709f741bf42.jpg


Sent from my SM-G950F using Tapatalk
 
wh
Thanks @Dela Rey Steyn
Am starting to think whether I should go for 26g or 27g (I have both).
27g is a bit crisper so it might work nicely - but I am thinking of starting off with 26g.

If I go 26g, how many wraps should I do? About 7 or 8? (2.5mm ID)
what wire are you using? i use 28g and 30g ss and target 1 ohm (2.5mm ID).
 
my go to wire used to be 26g kanthal. still have some left over and tried it again. seems to be giving me a metal taste after awhile. im enjoying ss in my expro. will stick to 28g as 30g is too flimsy and easy to mess up on rewicking.
 
my go to wire used to be 26g kanthal. still have some left over and tried it again. seems to be giving me a metal taste after awhile. im enjoying ss in my expro. will stick to 28g as 30g is too flimsy and easy to mess up on rewicking.

I run Ni80 roundwire or Comp Wire, 2.5mm. I get the same metal taste with SS316L on MTL. None of that with Ni80, Comp Wire on the startup until it settles in, then no more tangy taste.
 
my go to wire used to be 26g kanthal. still have some left over and tried it again. seems to be giving me a metal taste after awhile. im enjoying ss in my expro. will stick to 28g as 30g is too flimsy and easy to mess up on rewicking.
I also enjoy my SS plain round wire build in the Expro, 26g
 
Back
Top