What's that in the yellow circle? And in the red circle... That looks like a @hands drip tip on viagra
Major pitstop
- Thread starter Silver
- Start date
What's that in the yellow circle? And in the red circle... That looks like a @hands drip tip on viagra
The two goodies in the yellow circle are mod protectors... silicone washers that protect the bottom of the atty and the 510 on the mod.
The item in the red circle is a necklace that holds a spare drip tip when at vape meets so you can pop your own drip into a mod when testing someone else's set up.
Oh... My mod protectors are black plastic ones so I kinda figured as much but I like the look of the silicon.
That's a nifty piece of equipment there, the drip tip... That's cool even as a stand alone necklace when not at a vape meet
@Amir, your chirps above made me laugh
And you have a great eye for detail
Here is a pic of a similar drip tip nechlace of @Rob Fisher at the last JHB vape meet
Original post is here:
https://www.ecigssa.co.za/ecigssa-jhb-vapemeet-saturday-3-december-2016.t30662/page-13#post-471050
I need one of those as a fashion accessory
Speaking of eye for detail... it's spelled necklace not nechlace
Sent from my iPhone using Tapatalk
It's intentional... Silver is trying the Scottish Gaelic accent.Speaking of eye for detail... it's spelled necklace not nechlace
Sent from my iPhone using Tapatalk
Please don't tell me that's a fused clapton hanging around your neck holding up the drip tip
That could work but then how and where would you store your cotton pads?
Don't answer that... There are ladies on this forum!!
Nope it's a quality silver necklace.
The more pertinent question... but can u vape it though?
Sent from my iPhone using Tapatalk
Reading Rob's original post on the previous page I thought of posting exactly the same post, picture and all except for the disks. Thanks for saving me the trouble! Lol.
Wanna do a group buy on the Driptip Necklace?
Regards
Count me in on group buy. I'm out of the country at the moment so I may be slow to respond but I'm in.
Sent from my iPhone using Tapatalk
RDA, RDTA and RTA Pit Stop time!
This is my first major pitstop post, I tend to avoid posting as I have major OCD, no jokes, it takes me 2 days to wash my car, I remove the seats, exterior lights and wheels...but that's for another day. Some call me unnecessary but I prefer calling it "whole heartedly".
Took my time making a beautiful tri core alien (3 x 28ga, 38ga alien, all ni80, 5 wraps on a 2.5mm ID rod).
First I disassembled my ESG Skyline and removed all removable parts including o-rings and insulators and popped them into the ultrasonic cleaner with some dish soap for a well deserved spa bath.
Next I rinsed and dried everything and lined them up. Did you know the Skyline is made up of 15 removable pieces including screws and insulators and 10 o-rings?
Next up I installed all o-rings, gave all o-rings and threading a coat of PG with an ear bud.
I then installed my masterpiece, aligned, pulsed, worked out hot spots and left to cool.
I used The Cotton Candy Collection to wick, nice and snug through the coil and then combed the tails out with a blackhead remover, cut the excess fuzzies off flush with the o-ring on the outer part of the deck and tucked them in ever so gently making sure not to obstruct the airflow slot.
I then primed the build, let the juice soak into the cotton, assembled everything, closed the juice flow and filled the tank.
Before having a toot, this is the reward of my very meticulous and time consuming pitstop upon opening the juice flow. 
After taking a couple drags on her, I can say it was well worth the time and effort. FLAVOR, FLAVOR, FLAVOR!!!
Took my time making a beautiful tri core alien (3 x 28ga, 38ga alien, all ni80, 5 wraps on a 2.5mm ID rod).
First I disassembled my ESG Skyline and removed all removable parts including o-rings and insulators and popped them into the ultrasonic cleaner with some dish soap for a well deserved spa bath.
Next I rinsed and dried everything and lined them up. Did you know the Skyline is made up of 15 removable pieces including screws and insulators and 10 o-rings?Next up I installed all o-rings, gave all o-rings and threading a coat of PG with an ear bud. I then installed my masterpiece, aligned, pulsed, worked out hot spots and left to cool. I used The Cotton Candy Collection to wick, nice and snug through the coil and then combed the tails out with a blackhead remover, cut the excess fuzzies off flush with the o-ring on the outer part of the deck and tucked them in ever so gently making sure not to obstruct the airflow slot. I then primed the build, let the juice soak into the cotton, assembled everything, closed the juice flow and filled the tank. Before having a toot, this is the reward of my very meticulous and time consuming pitstop upon opening the juice flow. After taking a couple drags on her, I can say it was well worth the time and effort. FLAVOR, FLAVOR, FLAVOR!!!
This is the correct way of cleaning.This is my first major pitstop post, I tend to avoid posting as I have major OCD, no jokes, it takes me 2 days to wash my car, I remove the seats, exterior lights and wheels...but that's for another day. Some call me unnecessary but I prefer calling it "whole heartedly".
Took my time making a beautiful tri core alien (3 x 28ga, 38ga alien, all ni80, 5 wraps on a 2.5mm ID rod).View attachment 101873
First I disassembled my ESG Skyline and removed all removable parts including o-rings and insulators and popped them into the ultrasonic cleaner with some dish soap for a well deserved spa bath.View attachment 101872 Next I rinsed and dried everything and lined them up. Did you know the Skyline is made up of 15 removable pieces including screws and insulators and 10 o-rings?
Oh my gosh @Moey_Ismail - that is remarkable
Coil looks absolutely amazing
Didnt know there were 10 o rings
Hope the vape was rewarding!!
PS - lol on cleaning the car and taking wheels and exterior light off. Hehe. I would probably freak out if i even contemplated attempting that... And it would take me more than 2 days i think... Lol.
Coil looks absolutely amazing
Didnt know there were 10 o rings
Hope the vape was rewarding!!
PS - lol on cleaning the car and taking wheels and exterior light off. Hehe. I would probably freak out if i even contemplated attempting that... And it would take me more than 2 days i think... Lol.
Last edited:
Just cleaned out the Serpent mini 25. 24g Clapton with cotton bacon. Beautiful if you get the wicking correct!
Sent from my Redmi Note 3 using Tapatalk
Sent from my Redmi Note 3 using Tapatalk
Tedious job lol but I won't do it if I don't do it rightOh my gosh @Moey_Ismail - that is remarkable
Coil looks absolutely amazing
Didnt know there were 10 o rings
Hope the vape was rewarding!!
PS - lol on cleaning the car and taking wheels and exterior light off. Hehe. I would probably freak out if i even contemplated attempting that... And it would take me more than 2 days i think... Lol.
Major Tank Pitstop! I hope I can remember which parts go with which!
@Ash , I love the way you clean your atty's , by removing the O-rings. I also use a Ultrasonic cleaner, but keep my O-rings on, afraid I am going to break something. Now what I want to know is, what is the affect of the Ultrasonic waves on the O-Rings. I had a problem once with a SXK Exocet o-ring that has broken, so have the spares, I think it is a bad batch?
Similar threads
