Quick look at the Cthulhu V2

[method1]

Seems to be my usual luck with tanks - the machining on mine isn't very good.

The slot for the AFC is narrower on one end than on the other - this is what's causing the AFC to seemingly "lock" in place.

Threads on the JFC are a bit janky & JFC is almost impossible to adjust.

 

[Paulie]

Seems to be my usual luck with tanks - the machining on mine isn't very good.

The slot for the AFC is narrower on one end than on the other - this is what's causing the AFC to seemingly "lock" in place.

Threads on the JFC are a bit janky & JFC is almost impossible to adjust.

Try do this:

Take the bottom piece off (With the deck installed). Then remove the airflow control ring and if you look inside it you will see another ring in there. With your finger remove that ring. Then insert that center ring first (got small nipple so it can only go one way). then screw on the airflow ring till you see there no gap and then insert the top tank in.

Hope this helps.

 

[method1]

Try do this:

Take the bottom piece off (With the deck installed). Then remove the airflow control ring and if you look inside it you will see another ring in there. With your finger remove that ring. Then insert that center ring first (got small nipple so it can only go one way). then screw on the airflow ring till you see there no gap and then insert the top tank in.

Hope this helps.

Thanks, that's what I've done. I spent hours with it trying to make it work

Not being able to adjust the AFC properly sucks more though, basically has to be fully open (aka locked) or about 2/3 open if I want it to be adjustable.

 

[Paulie]

Thanks, that's what I've done. I spent hours with it trying to make it work

Not being able to adjust the AFC properly sucks more though, basically has to be fully open (aka locked) or about 2/3 open if I want it to be adjustable.

Hmm then maby you got a faulty one cause mine has no issues sorry man!

 

[method1]

Yeah pretty sure its faulty. Especially the AFC thing.

 

[method1]

Blurry pic again (yes the iphone camera sux)

Should still be able to see the issue with the "groove" - it's like this on both sides:

 

[Yusuf Cape Vaper]

Blurry pic again (yes the iphone camera sux)

Should still be able to see the issue with the "groove" - it's like this on both sides:

View attachment 35889

Blasphemy!! iPhone camera does not suck! Keep your phone 3hands distance from the object, click on the object, wait for it to adjust. And voila.




Sent from my iPhone using Tapatalk

 

[method1]

Blasphemy!! iPhone camera does not suck! Keep your phone 3hands distance from the object, click on the object, wait for it to adjust. And voila.




Sent from my iPhone using Tapatalk

Apple is offering replacement cameras for the iphone 6+ because of this very issue.

 

[Yusuf Cape Vaper]

Apple is offering replacement cameras for the iphone 6+ because of this very issue.

iPhone 6+ camera sucks then


Sent from my iPhone using Tapatalk

 

[Paulie]

It needs light

 

[method1]

It needs light

Just my luck as usual - another broken made in china p.o.s.

 

[Yusuf Cape Vaper]

Taken with an iPhone 5s


Sent from my iPhone using Tapatalk

 

[BumbleBee]

Just my luck as usual - another broken made in china p.o.s.

Have a chat with your vendor, I'm sure they'll help you out

 

[method1]

Taken with an iPhone 5s View attachment 35895View attachment 35896


Sent from my iPhone using Tapatalk

blurry

 

[Yusuf Cape Vaper]

blurry

Se moer is blurry ya


Sent from my iPhone using Tapatalk

 

[method1]

Se moer is blurry ya


Sent from my iPhone using Tapatalk

a natural reaction, but still blurry

 

[Paulie]

Lol here off mine with low light:

Sent from my iPhone using Tapatalk

 

[Mike]

@method1 you had a 50:50 chance of getting a dud...

 

[method1]

Lol here off mine with low light:

Sent from my iPhone using Tapatalk

Looks like the same slightly narrower lip on the left side of the AFC. In my case the AFC gets "stuck" in that narrower section.

 

[Paulie]

Looks like the same slightly narrower lip on the left side of the AFC. In my case the AFC gets "stuck" in that narrower section.

Strange cause mine is smooth like butter.

 

[Silver]

Strange cause mine is smooth like butter.

@Paulie, maybe your juice is lubing it up better?

(Runs and hides)

 

[Paulie]

@Paulie, maybe your juice is lubing it up better?

(Runs and hides)

Hahaha VG FTW!!

 

[moonunit]

How did you guys find the machining on yours, I won't lie after being so excited for this tank I am a bit disappointed in terms of quality of finishes, it small things but non the less they are there. For example my Goblin mini was flawless when I got it.

There is thread damage where the drip tip adaptor screws in. This is the first time it has been unscrewed.

One post sits a little skew

Have any of you found the airflow ring to be very loose?

Busy fighting with it now to get the tank section apart. Also found 2 shavings and 2 burrs on drilled holes.

Anyway let's see how it vapes...


Sent from my iPhone using Tapatalk

 

[method1]

How did you guys find the machining on yours, I won't lie after being so excited for this tank I am a bit disappointed in terms of quality of finishes, it small things but non the less they are there. For example my Goblin mini was flawless when I got it.

There is thread damage where the drip tip adaptor screws in. This is the first time it has been unscrewed.

One post sits a little skew

Have any of you found the airflow ring to be very loose?

Busy fighting with it now to get the tank section apart. Also found 2 shavings and 2 burrs on drilled holes.

Anyway let's see how it vapes...


Sent from my iPhone using Tapatalk

Mine also has problems with the machining.

The AFC jams in open position and the JFC threading isn't too hot.

Based on the post design the one post is pretty much just gonna be skew.

Not thrilled with it, I don't see it being part of my collection for long.

 

[Mike]

@moonunit upon closer inspection I have found a small niggle or two. Seems their QC is terrible though.