Show us your Builds - Aqua Atomisers

[MurderDoll]

Have a dual coil setup using 26g and ekowool in mine at the moment.

One of the things I really love about the aqua is that you don't hear it when you press the fire button.
Its dead quiet. Only when you take a toot you hear the air flowing in and taste the vapour.

Brilliant!

 

[rvdwesth]

Man I so need to get me one of these!!

Where can one buy the best clones locally?

 

[Andre]

Man I so need to get me one of these!!

Where can one buy the best clones locally?

Try www.vapeclub.co.za - they usually stock quality clones.

 

[Riaz]

ive just learnt something when filling the aqua

before unscrewing the base, tighten the airflow (close it) as well as the juice flow

makes it so much easier to put the base back once its filled up

 

[Riaz]

hi guys

what could be the cause of juice shooting out the drip tip when fired?

 

[Gazzacpt]

hi guys

what could be the cause of juice shooting out the drip tip when fired?

Try closing the juiceflow a bit sounds like overwicking. Only guessing but that would be my first move.

 

[Dv8]

Could be over saturation or the coil is just firing at clear shot of the drip tip... Try to make sure you not getting that sizzle sound as well thats normal a hint of over saturation


Sent from my iPhone using Tapatalk

 

[Riaz]

Could be over saturation or the coil is just firing at clear shot of the drip tip... Try to make sure you not getting that sizzle sound as well thats normal a hint of over saturation


Sent from my iPhone using Tapatalk

i always thought the sizzling sound of the coil was a good sign LOL

i tightened up the juice flow as @Gazzacpt suggested, and it seems to be working fine now

thanks for the input guys

 

[Al3x]

i always thought the sizzling sound of the coil was a good sign LOL

i tightened up the juice flow as @Gazzacpt suggested, and it seems to be working fine now

thanks for the input guys

@Riaz do you use the juice flow adjustment alot, and on what juices do you open the juice flow.
I have been using my aqua with the juice flow control all the way closed and I have not had an issue with it

 

[Riaz]

@Riaz do you use the juice flow adjustment alot, and on what juices do you open the juice flow.
I have been using my aqua with the juice flow control all the way closed and I have not had an issue with it

i use the juice flow on all juices, not sure why but i like it

i usually turn it open about two revolutions from closed

 

[Al3x]

I will try that and see how it goes, thanx @Riaz

 

[Riaz]

So I decided to do a quick rebuild on the Aqua

28g kanthal
2mm id
7/8wraps
After wicking and juice, 1ohm






Vapes beautifully




Sent from my iPhone using Tapatalk

 

[RezaD]

OK so I put together some pics of how to wick an Aqua in single coil configuration on request of one of the members. Please remember this wicking method only works with coils with 2.4mm or larger ID coils.



Running single 2.4mm ID 26G Kanthal @ 0.6 Ohms. You get a decent vape right down to 3.2 Volts on the battery. Also flavour is spot on. I cannot get the same vape from a dual coil config which I used until about 3 months ago. Now I single coil everything.

 

[Riaz]

Nice one @RezaD




Sent from my iPhone using Tapatalk

 

[Silver]

Great photos @RezaD !

 

[rvdwesth]

Man I hated my Aqua!
Such a finicky device, at least it forced my hand onto drippers

 

[RezaD]

Man I hated my Aqua!
Such a finicky device, at least it forced my hand onto drippers

Yes it's one of those love or hate devices. Came in very handy this past week. I overhauled my car's hydraulic system this past week and the Aqua served me well in the garage amongst the grease and grime. There was no way I was gonna allow Nicole in the garage. She's just not that type of girl. LOL. Seriously other than the Reo the Aqua is the only other device I still love to vape on. When you get it set up properly it is simply sublime hit after hit.