Eggzacery! Lol
Show us your Builds - Kayfun, Russians & Similar
- Thread starter devdev
- Start date
Eggzacery! Lol
you can do eeet
Well that is how I'm learning. Hahaha Good luck
You're doing great... just a little more practiceThat was the first thing I checked lol it makes no sense! And @Gizmo doesnt want to help meHe says I must learn
If no wires are touching the deck then ensure that the screws are tightened properly, also measure that your atty is making proper contact with the device you are reading your ohms off. Make sure that the centre is tightened properly under the atty.
Sent from deep within a vape cloud
Sent from deep within a vape cloud
meh! Over it! Ever single coil is coming out at 0.0... I will try again tomorrow right now though! I Just want to vape something
What kit are you testing the ohms on?meh! Over it! Ever single coil is coming out at 0.0... I will try again tomorrow right now though! I Just want to vape something
What setup (mod) are you using to fire the coil?
meh! Over it! Ever single coil is coming out at 0.0... I will try again tomorrow right now though! I Just want to vape something
0.0 damn, that's some serious sub ohm vaping you doing
But on a serious note, check tomorrow with fresh eyes, like everyone suggested, make sure it's not touching the deck and also that the wraps are not overlapping each other.
Sent from my S4 LTE using my finger
Are you using the MVP to test your coils on? It could be that the 510 connector isn't making good contact with the Kayfun, which could cause the 0.0 as well.meh! Over it! Ever single coil is coming out at 0.0... I will try again tomorrow right now though! I Just want to vape something
Sent from my SM-G900H using Tapatalk
especially the KF clones, the centre pin often sticks out way to much.
I think this is gonna be my next attempt.Kayfun chimney coil first try
View attachment 6718
View attachment 6719
View attachment 6720
View attachment 6721
View attachment 6722
View attachment 6723
View attachment 6724
View attachment 6725
View attachment 6726
View attachment 6727
View attachment 6728
Sent from my GT-I9300 using Tapatalk
First wanna finish out my second tank on the big. Then build this one.
Looks really good by the way.
Thanks @BumbleBeeQuick review for ya @BhavZ
I love the chimney coil! I was a mouth to lung guy until I built the chimney, more flavor, more TH and much bigger clouds! Just a little fiddley to wick but you get the hang of it pretty quick. I'm struggling to do mouth to lung inhales now
I tried the chimney coil in an evod cup and the flavour lacked for me but the throat hit was intense.
Will definitely give it a go on my next kayfun build.
hey guys
just got back from VK and @Stroodlepuff was making perfect coils, it was the positive screw pin that was not tight, luckily @Michael was there and sorted that screw out chop chop......
just thought i would share this
just got back from VK and @Stroodlepuff was making perfect coils, it was the positive screw pin that was not tight, luckily @Michael was there and sorted that screw out chop chop......
just thought i would share this
hey guys
just got back from VK and @Stroodlepuff was making perfect coils, it was the positive screw pin that was not tight, luckily @Michael was there and sorted that screw out chop chop......
just thought i would share this
Thank you @Michael and @PeterHarris for the help
You would think that as someone who sells this stuff all day and tells people these things I would think to check that on my own lol
So finally back home.
Been itching for a while to build the chimney coil.
This was my first attempt.
26g 7 wraps around 2mm.
Came out to 1ohm on the dot.
Not the neatest. I accident my collapsed the coil so tried to save it by building it up again.
Throat hit is definitely a lot higher than a standard coil.
Flavour has dropped a bit in my opinion.
For lung pulls it allows a lot more airflow.
Been itching for a while to build the chimney coil.
This was my first attempt.
26g 7 wraps around 2mm.
Came out to 1ohm on the dot.
Not the neatest. I accident my collapsed the coil so tried to save it by building it up again.
Throat hit is definitely a lot higher than a standard coil.
Flavour has dropped a bit in my opinion.
For lung pulls it allows a lot more airflow.
That would make a lot of sense then.
Its not bad. Will finish out the tank on it. then go onto something else.
maybe give the stove top coil a go.
My 100ft of kanthal has arrived. So I'll be able to start getting quite adventurous!
not to burst your bubble but I think that the stove top coil might not work as planned.
The stove top coil requires a cotton cloud as it cannot be wicked through like the micro coil. As the airflow of the kayfun is designed to feed from the bottom of the coil so adding enough wick to get the stove top coil to vaporise adequately may result in sufficating the coil (airhole being blocked by the cotton). I do stand under correction with this.
I only bring this up because I am very keen to give the stove top coil a go but for the life of me cant think of a way to prevent the airflow from being restricted, if you can find an effective way to wick the coil without sufficating the airflow please please please post pics of your build. The stove top coil is a mean coil and works a treat in drippers.
Thanks for the advice!
I didn't think of it that way.
Definitely something to ponder over.
I'll give it a think and bash and let you know what I come up with.
First thing though is to find out how to make one. I have no idea how to.
Similar threads
