I am confused here. @Andre you use ceramic wick/ekowool, but here you are explaining how you make micro coils.
How are you wicking your micro coils?
The Reomiser 2
- Thread starter devdev
- Start date
I am confused here. @Andre you use ceramic wick/ekowool, but here you are explaining how you make micro coils.
How are you wicking your micro coils?
With the 2 mm (slim) ceramic wicks I do micro coils. Also do micro coils with 1 mm hollow ekowool from time to time. One Reo currently with 4 strands of 1 mm hollow ekowool and the so called ugly coil - working quite well.
Yip there is something special about a neat coil! 
Time to change batteries… refill bottles and change wicks!
Old wicks out and dry burn done!
Wicks now in!
Fresh Battery and bottle filled for Erica!
Also a new battery and full bottle for Amanda!
Erica, Kiera, Olivia and Amanda all done and ready for the week ahead!
Old wicks out and dry burn done!
Wicks now in!
Fresh Battery and bottle filled for Erica!
Also a new battery and full bottle for Amanda!Erica, Kiera, Olivia and Amanda all done and ready for the week ahead!
Lovely @Rob Fisher
Feels good when they are all loaded and ready to go
Are those still the fAW (fake) AW batts?
Feels good when they are all loaded and ready to go
Are those still the fAW (fake) AW batts?
Yebo... they are... I have a few originals but I can't find new button tops and these have served me well!
Great coiling! How is the wicking now - dry hits? If you want less throat hit, just take the wick out, put the mandrel back in and push the coil to almost touching the deck. Or, if lazy, just push it down with your finger with the wick still inside.New coil 26 g 8 wraps on a 1.5mm bit
TH just went of the chart
Sent from my GT-I9300 using Tapatalk
Love reading your posts.
Although it makes me jelly as all hell. lol.
Sorry about that... but just think when you have worked your whole life and retire hopefully you can spend a little of your nest egg on your hobby that keeps you from dying!
ha ha.Sorry about that... but just think when you have worked your whole life and retire hopefully you can spend a little of your nest egg on your hobby that keeps you from dying!
No worries.
Its a good jelly, not a bad one.
Sigh.
Double post again.
Double post again.
Hey guys
When u dry burn ur old coil, does it turn silver again? Mine stays black. And I think it mutes my flavour. All that kakka that packs onto the coil.
So in the mean time I did a quick rebuild.
26g kanthal
1.5mm ID
10 wraps
1.02 Ohms
I tightened the coil on the drill like in the video and I must say its really neat. Good tip. Thanks.
Sent from my GT-I9500 using Tapatalk
When u dry burn ur old coil, does it turn silver again? Mine stays black. And I think it mutes my flavour. All that kakka that packs onto the coil.
So in the mean time I did a quick rebuild.
26g kanthal
1.5mm ID
10 wraps
1.02 Ohms
I tightened the coil on the drill like in the video and I must say its really neat. Good tip. Thanks.
Sent from my GT-I9500 using Tapatalk
Nice work Pete.
I think some people scrub that gunk off the coil, but I am not sure if that is necessary.
I do recommend you trim the ends off the coil legs. That is just additional resistance that serves no benefit
I think some people scrub that gunk off the coil, but I am not sure if that is necessary.
I do recommend you trim the ends off the coil legs. That is just additional resistance that serves no benefit
Hey guys
When u dry burn ur old coil, does it turn silver again? Mine stays black. And I think it mutes my flavour. All that kakka that packs onto the coil.
So in the mean time I did a quick rebuild.
26g kanthal
1.5mm ID
10 wraps
1.02 Ohms
I tightened the coil on the drill like in the video and I must say its really neat. Good tip. Thanks.
Sent from my GT-I9500 using Tapatalk
Boy those coil legs look super neat, awesome job man.
thanks, but i need to get used to that "bubble" in the left coil leg, the leg that comes out under the coil, as you need to push that leg up to make it tight against the drill bit....
Guys I have a bit of a problem . My top cap is stuck on the body of the reomizer .
Really don't want to pry them apart with pliers .
Really don't want to pry them apart with pliers .
R
un under hot,hot,hot water and then dry and quickly try and separate by hand
do you have like a rubber glove or leather, use that to hold the bottom part with pliers, it shouldn't scratch....
Similar threads
