So far I have no problems with that on mine
The Nuppin Thread
- Thread starter Rob Fisher
- Start date
So far I have no problems with that on mine
Yes, me neither, but good to know should someone have this problem.
I've been researching like mad here to try and locate a local place that stocks those screws and or drivers. Every hobby/distribution place I've tried is a complete fail.
It seems as though the only place is direct from the states. But it's the best according to all the RC forums.
http://www.miponline.com/MIP/HWrench.html
price $15.00
I've been researching like mad here to try and locate a local place that stocks those screws and or drivers. Every hobby/distribution place I've tried is a complete fail.
It seems as though the only place is direct from the states. But it's the best according to all the RC forums.
http://www.miponline.com/MIP/HWrench.html
price $15.00
Product: MIP Hex Driver Wrench 0.9 mm #9012
Low or Out of Stock. Just Ask Sales@MIPonline.com
Ok so I am late to the party here, but I would desperately like to get my hands on a Nuppin.
Anyone prepared to part with one? Name your price...
Alternatively, anyone know what happened to the Nuppin 2.0 that was mentioned previously on this thread?
Anyone prepared to part with one? Name your price...
Alternatively, anyone know what happened to the Nuppin 2.0 that was mentioned previously on this thread?
Oh Goose... take a Gander here! (@devdev)
http://www.ecigssa.co.za/group-buy-nuppin-version-2.t9480/
http://www.ecigssa.co.za/group-buy-nuppin-version-2.t9480/
Hahahaha, cheeky, but if that includes your Reo, about 5 VTCs and the Nuppin, we have a deal !
Hahahaha, cheeky, but if that includes your Reo, about 5 VTCs and the Nuppin, we have a deal !
Sorry bro, I love my Reo big time.
Sorry bro, I love my Reo big time.
If you have loved your Reo, and had knowledge of it, in the biblical sense, then I def don't want your Reo either @Alex
Some technical info on the Nuppin from pdib, on ECF:
I'm going to put a couple things here, so that it's easy to find in a few months.
These are links to posts from the previous sale regarding: easiest build video, more description, specifications for spare parts, yada yada.
PREVIOUS SALE, DESCRIPTION, COILING VID
PARTS SPECIFICATIONS AND WHERE TO GET
I will try to keep a small stock of hex keys, set screws (grub) and o-rings. PM if you need a few. I have ordered a few extra PEEK insulators as well. (have yet to confirm fit of insulator on V1 atty)
ADDIT: OH! when you're looking back at previous posts re: o-ring sizes, append this in your brain . . . . V2 atties were very specifically spec.ed and machined for 1x10mm on the atty base, and 1x11mm on the topcap/afc. You could still play with half sizes (like 1x11.5mm) for tighter or looser fit.
I'm going to put a couple things here, so that it's easy to find in a few months.
These are links to posts from the previous sale regarding: easiest build video, more description, specifications for spare parts, yada yada.
PREVIOUS SALE, DESCRIPTION, COILING VID
PARTS SPECIFICATIONS AND WHERE TO GET
I will try to keep a small stock of hex keys, set screws (grub) and o-rings. PM if you need a few. I have ordered a few extra PEEK insulators as well. (have yet to confirm fit of insulator on V1 atty)
ADDIT: OH! when you're looking back at previous posts re: o-ring sizes, append this in your brain . . . . V2 atties were very specifically spec.ed and machined for 1x10mm on the atty base, and 1x11mm on the topcap/afc. You could still play with half sizes (like 1x11.5mm) for tighter or looser fit.
Just some remarks from pdib on the Nuppin V2, in response to the statement directly below:
Tried a Nuppin on a Non low profile grand, just for kicks. As suspected, doesn't work. No thread engagement.
However, after converting my Grand to LP, it work great and looks great too.
Did you do this?
I'm not suggesting that people run this atty on a regular Grand. It's not designed for that. One can, perhaps; but it's really putting all tolerances at the brink.
Tried a Nuppin on a Non low profile grand, just for kicks. As suspected, doesn't work. No thread engagement.
However, after converting my Grand to LP, it work great and looks great too.
Did you do this?
I'm not suggesting that people run this atty on a regular Grand. It's not designed for that. One can, perhaps; but it's really putting all tolerances at the brink.
And specially for @huffnpuff, a remark a few days ago on ECF:
A little feedback about the new rimless change.
After 2 days of use I looked at the top of my LP Grand and found that the afc sleeve is carving a ring on the top of the LP from adjusting the airflow back and forth. When turned the friction of the turning sleeve against the top of the MOD is making a circle. Not a big deal but thought I would mention. I kind of like the rimmed setup a bit better but still very happy with the V2. Just my
A little feedback about the new rimless change.
After 2 days of use I looked at the top of my LP Grand and found that the afc sleeve is carving a ring on the top of the LP from adjusting the airflow back and forth. When turned the friction of the turning sleeve against the top of the MOD is making a circle. Not a big deal but thought I would mention. I kind of like the rimmed setup a bit better but still very happy with the V2. Just my
so, now that the v2 have arrived and should be in almost every-bodies hands that ordered.
If anybody decides to sell their v1 or v2 Nuppins I call first dibs.
Im sitting here looking at pics i got on whatsapp and am sad i missed out on this.
Is it true @Yiannaki and @Paulie, you guys are selling the v1?
If anybody decides to sell their v1 or v2 Nuppins I call first dibs.
Im sitting here looking at pics i got on whatsapp and am sad i missed out on this.
Is it true @Yiannaki and @Paulie, you guys are selling the v1?
Just a word of caution to the guys who got the nifty little screwdrivers for their Nuppins. The better fit and hand grip means more torque, so be VERY careful not to overtighten and strip the threads on the tiny grub screws/atty or soon we'll be discussing retapping tips 
I believe that take forever to heat up?
24g
2,5mm ID
0.24ohm
Message sent via tapatalk
Nope, it's pretty quick. I can only do less than 2 second draws.
Okay thx my next step is 24g then. Hope it will work in my cyclops.
It's my first time playing with 24g, and I'm pleasantly surprised.
Similar threads
