The Reomiser 2

I thought if Hi Ho @Silver could try my favourite Atty I would try his... so with my Shiny new Brass REO I ordered a Brass LP RM2.

I decided to stop looking at the Brass REO and build a coil and wick on the RM2 and give her a vape... epic fail with the RM2... The one post is loose and fell out. :-(

The post has threads on the bottom but it doesn't seem to screw into anything.

IMG_2588.JPG

So long story short... Shiny Brass got a Cyclone and she rocks!
 
I thought if Hi Ho @Silver could try my favourite Atty I would try his... so with my Shiny new Brass REO I ordered a Brass LP RM2.

I decided to stop looking at the Brass REO and build a coil and wick on the RM2 and give her a vape... epic fail with the RM2... The one post is loose and fell out. :-(

The post has threads on the bottom but it doesn't seem to screw into anything.

View attachment 31132

So long story short... Shiny Brass got a Cyclone and she rocks!

No worries @Rob Fisher
That RM2 i think is relatively easy to disassemble and get it right
Johan knows and I am sure several others do as well

Glad the cyclone is doing service on that small brass powerhouse
 
I think the brass piece has probably shifted. That is why it will not screw in.
 
I had forgotten how much I hate RM2's. They used to cut me and still do... the RM2 will be in the Gorge tomorrow when the sun comes up... and this one is not quite the same as in the pictures...

IMG_2598.JPG
 
I had forgotten how much I hate RM2's. They used to cut me and still do... the RM2 will be in the Gorge tomorrow when the sun comes up... and this one is not quite the same as in the pictures...

View attachment 31136
Oh my, no icon for that. Yes, it does not have the screw at the bottom. I am as in the dark as you, unfortunately. Please, do not bleed out:p - Cognac now speaking.
 
Rob, sorry about the troubles
And I feel bad because you wanted to rig it up because i rigged up the cyclone
Naughty RM2!
 
With the right logic and attitude, yes ;).

I'll hang on to it till I see you again... the sharp edges on the RM2 are insane and I suddenly remember back to when I first started with a REO how many times the stupid thing cut me... three of my fingers are sliced thanks to it... I was washing a cyclone for a juice change and the pain of three cuts brought it all running back to me.

Rob is sending me a replacement! ;-)
 
I'll hang on to it till I see you again... the sharp edges on the RM2 are insane and I suddenly remember back to when I first started with a REO how many times the stupid thing cut me... three of my fingers are sliced thanks to it... I was washing a cyclone for a juice change and the pain of three cuts brought it all running back to me.

Rob is sending me a replacement! ;-)

I own 3 RM2's (one off, courtesy of you) - I've never been cut/slashed by anyone of them, how do you do it?
 
I own 3 RM2's (one off, courtesy of you) - I've never been cut/slashed by anyone of them, how do you do it?

Tightening the atty... the edges are really sharp! And also when cleaning it... cleaning inside the cap and the edge of the cap is razor sharp!
 
Tightening the atty... the edges are really sharp! And also when cleaning it... cleaning inside the cap and the edge of the cap is razor sharp!

I believe you, I assume I'm lucky or the skin on my fingers are just more ...... robust.
 
This evening I did a new coil for REO Silver

ImageUploadedByTapatalk1437851050.738907.jpg

Nothing fancy but my gosh she kicks like a mule

6/7 wraps, 28g, 1.6mm ID. Came out at 0.91 ohms.

Just feels so strong and has so much gusto. And lovely crispness

These little simple coils work so well in the RM2!
 
I have to agree with @Silver, I just put the same coil into my RM2 and it just works. Perfect for the Reo mini, enough vapour, great flavour and easy on the battery.
 
Your coil and placement is exactly the way I build my Rm2, I'd love to see how you wick it. I snip the wick short and fluffed on the right, with a long'ish tail on the left which gets placed between the post and onto the deck. (...I need a better camera lol)

Couldn't agree more with you guys, awesome coil for the Rm2 :rock:

This evening I did a new coil for REO Silver

View attachment 32101

Nothing fancy but my gosh she kicks like a mule

6/7 wraps, 28g, 1.6mm ID. Came out at 0.91 ohms.

Just feels so strong and has so much gusto. And lovely crispness

These little simple coils work so well in the RM2!
 
Hi @DoubleD
Here is a pic of the wick in that coil.

ImageUploadedByTapatalk1437890255.113563.jpg

Just organic cotton. Not too tight but after being juiced up it swells a bit. Touching the deck on both sides. Perhaps I used a fraction too much this time but it works very well.
 
Some extra notes on this coil's position

Its a fraction more toward the middle than I usually do
Usually i am very close to the edge.

Being slightly more toward the middle has increased the throat hit and decreased the flavour slightly.
Coil height is directly in line with the airhole. I.e. Airhole is at centre of coil

There seems to be a diagonal line of throat hit versus flavour
High up and closer toward the middle gives the max throat hit and less flavour
Low down (slightly lower than airhole) and right on the edge of the atty gives much more flavour and less throat hit

I usually am a bit higher than the airhole (bottom of coil in line with airhole) and quite close to the edge. So this gives good flavour and good throat hit.

For this coil, i moved it a bit toward the centre. Behaved exactly as i thought it would.
 
I hv a reo mini for sale. 3 batteries. 2 reo drippers.R2,500
Contact 0762540390
 
Morning. Is the rm2 real stainless steel or copper etc covered in ss? Askingbecause would like to polish it but a while ago used pliers to u screw it and the little scratch ive done on the base of it show a yellowish color like coppery etc .
 
Back
Top